Gravity: I2C SCD41 Infrared CO2 Sensor - module with CO2, temperature and humidity sensor
ID: 1185007
€69.66
Tax included
€56.64 tax excl.
SCD41 CO2, temperature and humidity sensor module. Equipped with a Gravity connector, it communicates via an I2C interface. DFRobot SEN0536
Description
SCD41 CO2, temperature and humidity sensor module. It allows ambient carbon dioxide concentrations to be measured in the range from 400 to 5,000 ppm. In addition, it has an integrated temperature and humidity sensor, making it suitable for environmental sensing, scientific experiments and air quality studies. It can be used in systems with an operating voltage of 3.3 V or 5 V, and communication is via an I2C interface (Gravity connector). Full documentation and examples are available on the product page.
Features
- Photo acoustic CO2 sensor
- Integrated temperature and humidity sensor
- CO2 measuring range: 400 ppm - 5000 ppm
- Accuracy: ±(40 ppm + 5% of reading)
- Current consumption: 17 mA (measurement time = 5 s) / 0.5 mA (measurement time = 5 min)
- Fully calibrated
- I2C digital interface (address 0x61)
- Power supply: 3.3 V to 5 V
- Sensor element size: 10.1 x 10.1 x 6.5 mm
- Module dimensions: 32 x 27 x 8 mm
Kit contains
- Gravity module: I2C SCD41 Infrared CO2 Sensor
- Gravity-4P I2C/UART cable
1185007
Data sheet
- Interface
- I2C
- Type of sensor
- SCD-41
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- CO2
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
- Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
€5.81 24hAvailable quantity: 1 AvailableGravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502
€15.82 24hAvailable quantity: 4 Available
Other products in the same category (16)
Module with a formaldehyde sensor made in MEMS technology. It allows gas detection in the range of 0 to 3 ppm and has an analog output. DFRobot SEN0563
€6.37 24hAvailable quantity: 3 AvailableA sensor used to detect pollutants in the air by measuring gases such as hydrogen, ethanol and carbon monoxide. It is used in various areas, such as the food industry, chemical industry, air quality control in laboratories and environmental monitoring. Figaro TGS2600
€6.59 24hAvailable quantity: 8 AvailableModule with a smoke concentration sensor made in MEMS technology. It allows gas detection in the range of 10 to 1000 ppm and has an analog output. DFRobot SEN0570
€5.93 24hAvailable quantity: 4 AvailableModule with ozone detection sensor. It performs measurements up to 10 ppm with a resolution of 0.01 ppm. It has a UART output and an analog output. ZE25-O3
€60.74 24hAvailable quantity: 1 AvailableModule with CO2, temperature and humidity sensor SCD-40. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5187
€61.05 24hAvailable quantity: 1 AvailableMethane sensor module made in MEMS technology. It allows gas detection in the range of 1 to 10000 ppm and has an analog output. DFRobot SEN0565
€6.28 24hAvailable quantity: 3 Available No product available!
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
€7.91 24hAvailable quantity: 1 AvailableA sensor that detects the concentration of nitrogen dioxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0471
€196.90 4 weeks No product available!
The module with a smoke sensor and flammable gases (MQ-2) allows the measurement of gas concentrations such as natural gas, hydrogen as well as smoke and ethanol. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity. modMQ-2
€1.24 6 weeks No product available!
- Available
Formaldehyde sensor (HCHO) dedicated to measuring ambient air quality. It is used to detect whether the surrounding environment exceeds a set concentration threshold. It is powered by a voltage of 5 V to 24 V and has an output in the form of a two-state digital signal. DFRobot SEN0595
€25.75 24hAvailable quantity: 1 AvailableThe module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
€19.12 24hAvailable quantity: 4 AvailableThe module with the natural gas and LPG concentration sensor (modMQ-5) allows the measurement of the concentration of natural gas, carbon monoxide, alcohol and methane. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.
€1.90 24hAvailable quantity: 8 AvailableModule with the MiCS-5524 analog gas sensor. It allows you to measure the concentration of CO, CH4, 2H5OH, C3H8, C4H10, H2, H2S and NH3. DFRobot SEN0440
€11.23 24hAvailable quantity: 3 AvailableENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
€28.88 24hAvailable quantity: 3 Available
SCD41 CO2, temperature and humidity sensor module. Equipped with a Gravity connector, it communicates via an I2C interface. DFRobot SEN0536