Gravity: NO2 Sensor - module with a nitrogen dioxide concentration sensor
ID: 1178460
5902186310032
zł702.96
Tax included
zł571.51 tax excl.
A sensor that detects the concentration of nitrogen dioxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0471
Description
A sensor that detects the concentration of nitrogen dioxide. It is equipped with a factory calibrated probe and allows you to quickly and accurately measure the concentration of gas in the environment. The probe used is resistant to interference, offers high stability and sensitivity as well as a service life of up to two years. The sensor communicates via the I2C interface, UART or analog output, has 32 modifiable I2C addresses, an integrated temperature compensation algorithm and a threshold alarm function. It can be widely used for the detection of nitrogen dioxide in industry and environmental protection. Full documentation and examples of use are available on the product page.
Features
- Detected gas: nitrogen dioxide (NO2)
- Measuring range: 0 to 20 ppm
- Output signal: I2C, UART (0 to 3V), analog output
- Working temperature: -20 to 50 ℃
- Working humidity: 15 to 90% RH
- Service life:> 2 years (in air)
- Operating voltage: 3.3 to 5.5 V DC
- Working current: ＜ 5mA
- Adapter plate dimensions: 37 x 32 mm
Kit contains
- Gravity: NO2 Signal Conversion Board
- NO2 probe
- 4-pin Gravity cable
1178460
Data sheet
- Interface
- I2C/UART/Syganał analogowy
- Type of sensor
- inny
- Power supply voltage
- 3,2 - 5,5 V
- Concentration measurement
- pozostałych gazów
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 37
Available
Available
Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231
zł348.46
24h
Available quantity: 2
Available
A set of 10 cables, 30 cm long, compliant with the Gravity standard. DFRobot FIT0513
zł28.22
24h
Available quantity: 6
Available
A sensor that detects the concentration of hydrogen fluoride. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0475
zł1,367.71
Delivery date unknown
No product available!
Other products in the same category (16)
Module with LPG gas concentration sensor (MQ-6) in the range of 200 - 10,000 ppm. The module has an analogue output and a digital output triggered by exceeding the threshold of sensitivity. modMQ-6
zł6.89
24h
Available quantity: 5
Available
A sensor that detects the concentration of ammonia. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0469
zł722.94
4 weeks
No product available!
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł109.00
24h
Available quantity: 3
Available
Sensor that detects the concentration of chlorine. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0468
zł722.94
4 weeks
No product available!
The module with a methane concentration sensor (MQ-4) in the range up to 10,000 ppm, has an analogue output and an output triggered by exceeding the threshold of sensitivity.
zł8.07
24h
Available quantity: 7
Available
A sensor that detects the concentration of hydrogen sulphide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0467
zł335.61
4 weeks
No product available!
A sensor that detects the concentration of hydrogen fluoride. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0475
zł1,367.71
4 weeks
No product available!
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a Qwiic/STEMMA QT connector, it communicates via the I2C interface. Pimoroni PIM587
zł310.43
4 weeks
No product available!
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł79.42
24h
Available quantity: 2
Available
Module with the MiCS-5524 analog gas sensor. It allows you to measure the concentration of CO, CH4, 2H5OH, C3H8, C4H10, H2, H2S and NH3. DFRobot SEN0440
zł45.29
24h
Available quantity: 1
Available
A module for the detection of gases and vapors of alcohols, including ethanol.
zł23.10
24h
Available quantity: 2
Available
Pololu MQ Gas Sensor Carrier
zł5.97
24h
Available quantity: 8
Available
A sensor that detects the concentration of hydrogen chloride. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0474
zł925.55
4 weeks
No product available!
Module with an oxygen concentration sensor in the environment. It allows you to measure the volume of oxygen in the range from 0 to 100%. It communicates via the I2C interface. DFRobot SEN0496
zł498.61
4 weeks
No product available!
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
zł152.35
24h
Available quantity: 3
Available
The MQ-7 sensor allows you to measure the concentration of carbon monoxide (carbon monoxide). The measuring range of the sensor is in the range of 10 - 10,000 ppm
zł8.25
24h
Available quantity: 4
Available
A sensor that detects the concentration of nitrogen dioxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0471