![FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards](https://kamami.pl/71570-large_default/featherwing-oled-128x32-oled-add-on-for-all-feather-boards.jpg)
![FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards](https://kamami.pl/71570-large_default/featherwing-oled-128x32-oled-add-on-for-all-feather-boards.jpg)
zł71.67 tax excl.
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.
Tested working with all Feather boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus
FeatherWing Proto - Prototyping Add-on For All Feather Boards
FeatherWing Doubler is a shield that allows you to create your own layout based on two or one Feather series. The plate has 256 holes, including designated, common solder points for supply voltages. Adafruit 2890
This module enables the Feather series range to be expanded with 8 12-bit PWM outputs that can be used, for example, to control servos or LED diodes. Adafruit 2928
DS3231 Precision RTC FeatherWing adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. Adafruit 3028
7-segment display controller, allowing communication over the I2C bus. Allows you to limit the pins needed to control the display. Adafruit 3088
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. RED matrix. Adafruit 3134
OLED 0.91" display with a resolution of 128x32 pixels. Power supply from 3.3 V to 5V, communicates via the I2C interface. SB Components 21796
No product available!
Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)
Monochrome OLED display with a screen diagonal of 0.96" and a resolution of 128x64 pixels. The display has a built-in SSD1306controller, communication via the I2C or SPI interface. DFRobot DFR0650
Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in white. It communicates via the SPI interface. ModOLEDdisp0.66"SPIwhite
No product available!
A 0.96-inch white OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (E)
OLED display 128x64 0.96 "AA, powered by 3V, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL BLUE display color, work temperature from -40 to +70 ext. CAP
Module with 0.91 "OLED display with a resolution of 128 x 32 pixels, thanks to the SSD1306 driver and communication via the I2C bus, it is an ideal solution to build a device with a spectacular appearance and reliable work
No product available!
100x8 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
Module with 1.3 "OLED display with a resolution of 128 x 64 pixels, thanks to the SH1106 driver and communication via the I2C bus is an ideal solution to build a device with a spectacular appearance and reliable work
No product available!
A 0.96-inch yellow-blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (C)
Monochrome OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. The display has a built-in SSD1306 controller, communication via the I2C interface. DFRobot DFR0648
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
Module with black and white OLED display, 0.96" diagonal and 128x64 px resolution. Equipped with STEMMA QT connector, communicates via I2C or SPI interface. Adafruit 326
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight. Adafruit 2900