DFRobot Gravity NFC module with UART and I2C interface
ID: 577437
5906623406197
€51.41
Tax included
€41.79 tax excl.
NFC module with built-in antenna on the board. The module has a Gravity connector. Memory communication can be done through one of the serial interfaces: UART or I2C. DFRobot DFR0231-H
Description
NFC module based on the NXP PN532 chip with built-in antenna on the board. The module has a Gravity connector for connecting the device to the most popular development kits such as Arduino or micro:bit. Memory communication can be done through one of the serial interfaces: UART or I2C. Thanks to the dual interface, the module can work with both microcontrollers and PCs via a USB-UART converter.
Near Field Communication (NFC), also known as short-range wireless communication, is a short-range wireless communication technology that allows contactless point-to-point data transmission (at a distance of ten centimeters) to exchange data between electronic devices.
Features
- IC: NXP PN532
- Interface: Gravity I2C & UART (PH2.0-4P, Logic Level 0-3.3V)
- UART Baud Rate: 115200 bps
- I2C Address: 0x48
- Communication Frequency: 13.56 MHz
- Maximum Communication Distance: ≥10mm，depend on the size of the NFC card/tag
- Protocol Support:
- Reader/Writer Mode: ISO/IEC 14443A, ISO/IEC 14443B, MIFARE, FeliCa
- Card Emulation Mode: ISO 14443A/MIFARE Classic 1K or 4K, FeliCa
- Peer-to-Peer: ISO/IEC18092, ECM340
- Input Voltage (VCC) : 3.3V~5.5V
- Dimension: 110×50 mm / 4.33×1.97 in
- Weight: 20 g
Example connection
Kit contains
- Gravity: UART & I2C NFC Module
- Gravity-4P I2C/UART Sensor Wire
- XH2.54-2P Black Header
- MIFARE Classic NFC Tag Sticker (Round)
577437
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Regular price€26.49€22.63 24hAvailable quantity: 9 AvailableA set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Regular price€50.37€45.77 Delivery date unknown No product available!
- Available
Other products in the same category (16)
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
€10.76 24hAvailable quantity: 3 Available2x16 character LCD display. It can display the font in any color from the RGB palette. Communication via the I2C interface. The module has a lead compliant with the Gravity standard. DFRobot DFR0554
€14.82 24hAvailable quantity: 1 AvailableModule with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
€2.77 24hAvailable quantity: 1 AvailableModule with an IR transmitter operating at a frequency of 38kHz. The module is supplied with the voltage from 3 to 5V. FRobot DFR0095
€4.13 4 weeks No product available!
Module with a button, LED diode and a white cap. DFRobot DFR0029-W
€2.02 24hAvailable quantity: 2 AvailableModule with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 10 A. DFRobot SEN0288
€26.04 24hAvailable quantity: 11 AvailableModule with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
€23.93 24hAvailable quantity: 1 AvailableA small module with a PAJ7620U2 gesture detection sensor. Can recognize up to 13 gestures. Communication via the Gravity I2C interface. DFRobot SEN0315
€14.94 4 weeks No product available!
Flexible 16x16 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0463
€99.89 4 weeks No product available!
360° encoder module with LED indicators. It communicates via the I2C interface (Gravity connector). DFRobot SEN0502
€12.04 4 weeks No product available!
Module with LCD display 16x2 characters with gray backlight. It is supplied with the voltage from 3.3 V to 5 V and communicates via the I2C interface. DFRobot DFR0557
€13.78 24hAvailable quantity: 1 AvailableGravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
€75.87 24hAvailable quantity: 1 AvailableBright white SMD 3528 LED module. DFRobot DFR0438
€2.45 24hAvailable quantity: 2 AvailableModule with a motion sensor that uses the Doppler effect to detect moving objects using microwaves. It is powered with the voltage of 5 V and has a digital output (Gravity connector). DFRobot SEN0192
€11.34 24hAvailable quantity: 2 AvailableModule with a button and blue LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-B
€5.58 24hAvailable quantity: 2 AvailableModule with MOSFET and a Gravity connector. It allows you to easily connect and control the voltage from 5V to 30V and the current up to 2.5A. DFRobot DFR0643
€9.12 24hAvailable quantity: 4 Available
NFC module with built-in antenna on the board. The module has a Gravity connector. Memory communication can be done through one of the serial interfaces: UART or I2C. DFRobot DFR0231-H