Categories - Official Raspberry Pi distributor

New products

iNode Care Sensor 4 (yellow) - wireless motion sensor, temperature and magnetic field

Wireless motion sensor, temperature and magnetic field with built-in event memory (recorder)

More details

ID: 560408

20,46€ gross (23% VAT)
16,63€ net

Add to wishlist

More info


iNode Care Sensor # 4 is a wireless motion sensor, temperature and magnetic field with built-in event memory (recorder). It is intended mainly for home automation and care for the elderly. The sensor allows you to detect the movement of objects to which it is attached. These can be, for example, entrance doors, windows, doors from the refrigerator, container with medicines. It also allows you to determine the position relative to the ground plane.

The device status is sent on-line in the broadcast frame every ca. 1.28 seconds and can be archived in the internal memory along with the date and time of the event. This allows you to determine if and when the drawer, refrigerator, bag etc. was opened. The sensor can work with iNode Care Relay . The device configuration software allows you to specify the conditions for compliance with which the alarm will be sent, and hence the activation / deactivation of an external device.


Bluetooth Low Energy

  • Configurable from PC:
    • Power with which the device operates in the range from -18dBm to + 8dBm (maximum range up to 200m in open space)
    • device name
    • Threshold temperature value that sends an alarm
    • On. / Off. alarm caused by movement or change of position
    • On. / Off. alarm caused by the presence of a magnetic field or its absence
    • The type of archived information
    • Group (logical network) to which alarms are sent
    • user password
    • Device access password; independent of the user's password, password for authorizing the application for a smartphone or PC (protects it against being copied and used by another client)


  • CR2032 battery


  • plastic
  • Dimensions: Ø 32mm x 9.5mm


  • The possibility of remote software replacement
  • Two LEDs
  • 10-bit or 14-bit motion sensor, 3-axis accelerometer
  • Temperature sensor with a resolution of 1 ° C
  • Working temperature: from -30 to 65 ° C
  • Humidity: 35-80% RHG
  • Weight: 5g

Additional magnetic field sensor

  • sensitivity:
    • 700μT type, 1100μT max.
  • Type:
    • Omnipolar (to detect the magnetic field is not important direction)


  • CR2032 battery


  • Windows NT / XP / Vista / 7.0 / 8.0

The iNodeSetup.exe configuration software works only on Windows with a Bluetooth adapter based on the CSR 8510 chipset or iNode Serial USB Transceiver, iNode LAN.


  • Detection of magnetic fields
  • Home automation
  • Alarm systems and property protection
  • Care for the elderly

You can also buy a USB 4.0 Bluetooth adapter available in our offer .

To download