

€3.20 tax excl.
Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Keyboard module with 10 tact switch buttons. The output of each button has been led to pins with a 2.54 mm raster together with GND reference pins, which allows the board to be used to control other modules with digital inputs, eg DFPlayer Mini or Voice Recorder without additional adapters. In addition, the buttons together with appropriately selected resistors form a matrix that can be connected to the analog pin of the microcontroller. The set includes dedicated caps to facilitate the use of the keyboard. Full documentation with application examples is available on the product wiki page.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Cables for evaluation boards, set of 10 pcs., blue colour
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
Gravity: Voice Recorder Module is a sound recording module powered by 5V voltage. It can store sounds up to 10 seconds long. DFRobot SEN0197
Mini MP3 player with microSD card support. It can work as a separate device and play sounds from the card or be controlled via the UART serial interface. DFRobot DFR0299
Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
Mini keyboard with 16 buttons and RGB backlight. Equipped with a connector compatible with Grove, it communicates via the I2C interface. Adafruit 3954
Module with a bistable button and green LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-G
Touch keyboard module with 8 buttons and one line sensor (slider)
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
Module with a button and re LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-15932
Module with a button, LED diode and a blue cap. DFRobot DFR0029-B
Numeric keypad module with 12 buttons. The board has the ATtiny85 microcontroller, which processes data from the keyboard and sends it in a convenient form via the I2C interface. SparkFun COM-15290
Module with a button and yellow LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-Y
Universal module for building a keyboard. The set consists of a control board with a miniUSB socket and cables with crocodile clips
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
No product available!
Waveshare 8 Push Buttons module provides 8 single push buttons in 1 board. Waveshare 3678
5-button keyboard module with analog output
The module is equipped with two buttons in red and blue. It communicates via a digital interface and allows you to add simple controls to your M5Stack based project. M5Stack U025
Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792