![Waveshare LED matrix RGB WS2812B 8 x 4 for Raspberry Pi](https://kamami.pl/91526-large_default/waveshare-led-matrix-rgb-ws2812b-8-x-8-for-raspberry-pi.jpg)
![Waveshare LED matrix RGB WS2812B 8 x 4 for Raspberry Pi](https://kamami.pl/91526-large_default/waveshare-led-matrix-rgb-ws2812b-8-x-8-for-raspberry-pi.jpg)
zł36.22 tax excl.
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
RGB LED matrix module (WS2812B) 8 x 4 diodes for Raspberry Pi. This extension is connected directly to the GPIO Raspberry Pi connector. Communication takes place using only one signal pin. The diodes are connected in series. The signal pin can be disconnected from the GPIO connector by means of a jumper in the form of a soldered resistor 0R. Python's service examples and the WEB interface have been made available to the module.
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
No product available!
Light ring with 60 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444
No product available!
LED diode 10LED yellow - bargraph, replacement for: DC-10YWA
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM334
Gravity module with a colored RGB WS2812 LED. Thanks to the controller built into the diode, you can connect the modules in series and control all with one microcontroller port. DFRobot DFR0605
Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354
LED matrix display module (in red color) with an organization of 14 columns x 9 lines, compatible with Arduino.
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
A set of 20 modules with RGB diodes with a diameter of 12.5 mm. The diodes have a 24-bit range of colors. Adafruit 1559
No product available!
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT