zł25.28 tax excl.
Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12
The ring is based on RGB WS2812B diodes. They use a built-in driver that communicates via a special digital protocol, thanks to which only one pin of the microcontroller is enough to operate the module. The matrix has input and output connectors, they can be connected in series, as well as connected with a tape or other module with WS2812B diodes. The board is powered with the voltage from 3.3 V to 5 V and is equipped with a Gravity connector. Perfect as an electronic compass direction indicator.
Manufacturer
Responsible person
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 700 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
Ring with 7 individually addressable WS2812B RGB LEDs on a 23mm diameter board. A single data line controls the LEDs, while DIN and DOUT connections allow multiple WS2812B modules to be daisy-chained. The board operates from 5V, with the Ring7 specification listing a current consumption of 18mA per LED. Soldered 333055
Ring with 12 individually addressable WS2812B RGB LEDs, allowing independent control of the color and brightness of each light point. The module operates at 5V and uses a single-wire data interface, while DIN and DOUT allow additional modules to be daisy-chained. The outer diameter of the ring is 44mm. Soldered 333070
LED ring featuring 24 addressable WS2812B RGB LEDs with independent color and brightness control for each LED. A single data line controls the ring, while the data output allows additional compatible modules to be connected. The ring has a 67mm outer diameter, operates from a 5V supply and can be used for lighting animations and status indicators. Soldered 333101
NeoPixel LED ring with 16 individually addressable 5050 WWA LEDs providing warm white, cool white and amber light. The module operates from 5V, uses a single data line and supports daisy-chaining multiple rings. Adafruit 6527
Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12