Round and round and round they go! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.
There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.
Comes as a single ring with 24 individually addressable RGB LEDs assembled and tested.
NeoPixel Ring - 24 x WS2812 5050 RGB LED with Integrated Drivers (11:48)
Manufacturer
Responsible person
Adafruit 1463
No product available!
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812
No product available!
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812B
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 700 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
Ring with 7 individually addressable WS2812B RGB LEDs on a 23mm diameter board. A single data line controls the LEDs, while DIN and DOUT connections allow multiple WS2812B modules to be daisy-chained. The board operates from 5V, with the Ring7 specification listing a current consumption of 18mA per LED. Soldered 333055
Ring with 12 individually addressable WS2812B RGB LEDs, allowing independent control of the color and brightness of each light point. The module operates at 5V and uses a single-wire data interface, while DIN and DOUT allow additional modules to be daisy-chained. The outer diameter of the ring is 44mm. Soldered 333070
LED ring featuring 24 addressable WS2812B RGB LEDs with independent color and brightness control for each LED. A single data line controls the ring, while the data output allows additional compatible modules to be connected. The ring has a 67mm outer diameter, operates from a 5V supply and can be used for lighting animations and status indicators. Soldered 333101
NeoPixel LED ring with 16 individually addressable 5050 WWA LEDs providing warm white, cool white and amber light. The module operates from 5V, uses a single data line and supports daisy-chaining multiple rings. Adafruit 6527
24 individually addressable RGB LEDs arranged in a closely spaced circle, controlled with a single digital output of a microcontroller. Adafruit 1586