WS2812-16 RGB LED Ring - RGB light ring with WS2812B diodes
ID: 1178683
5902186310223
zł52.10
Tax included
zł42.36 tax excl.
Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16
Description
The ring is based on RGB WS2812B diodes. They use a built-in driver that communicates via a special digital protocol, thanks to which only one pin of the microcontroller is enough to operate the module. The matrix has input and output connectors, they can be connected in series, as well as connected with a tape or other module with WS2812B diodes. The board is powered with the voltage from 3.3 V to 5 V and is equipped with a Gravity connector. Perfect as an electronic compass direction indicator.
Features
- 16 RGB WS2812B LEDs
- Supply voltage: from 3.3 V to 5 V
- Current consumption: up to 100 mA
- Each of the primary colors of the diode (R, G, B) can adopt up to 256 levels of brightness
- The possibility of obtaining a color in one of over 16.7 million color shades
- Laminate color: black
- Gravity connector
- Outer diameter: 70 mm
- Inner diameter: 49 mm
Kit contains
- WS2812-16 RGB LED Ring
- 30 cm Gravity cable
1178683
Data sheet
- Voltage
- 3,3 - 5 V
- Colour
- RGB
- Outer diameter
- 70 mm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 84
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.65
24h
Available quantity: 3
Available
Other products in the same category (16)
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
zł10.01
24h
Available quantity: 8
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
zł33.43
4 weeks
No product available!
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812
zł19.90
24h
Available quantity: 2
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
zł28.62
24h
Available quantity: 6
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
zł35.25
4 weeks
No product available!
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 350 mA, offering a wide beam angle of 120 °
zł7.90
4 weeks
No product available!
Module with 24 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020168
zł55.45
24h
Available quantity: 2
Available
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171
zł48.86
24h
Available quantity: 2
Available
No product available!
Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12
zł31.86
24h
Available quantity: 1
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020128
zł52.25
24h
Available quantity: 4
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
zł24.56
24h
Available quantity: 7
Available
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812B
zł23.35
24h
Available quantity: 10
Available
The ring has eight RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from the 5V range, only one signal line is required to control it. NeoPixel Ring 8 x WS2812
zł4.94
4 weeks
No product available!
24 individually addressable RGB LEDs arranged in a closely spaced circle, controlled with a single digital output of a microcontroller. Adafruit 1586
zł85.83
24h
Available quantity: 1
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
zł30.18
24h
Available quantity: 7
Available
Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16