![LiIon or LiPoly Charger BFF - Li-Ion and LiPo charger module for QT Py LiIon or LiPoly Charger BFF - Li-Ion and LiPo charger module for QT Py](https://kamami.pl/48456-large_default/liion-or-lipoly-charger-bff-li-ion-and-lipo-charger-module-for-qt-py-5397.jpg)
![LiIon or LiPoly Charger BFF - Li-Ion and LiPo charger module for QT Py LiIon or LiPoly Charger BFF - Li-Ion and LiPo charger module for QT Py](https://kamami.pl/48456-large_default/liion-or-lipoly-charger-bff-li-ion-and-lipo-charger-module-for-qt-py-5397.jpg)
zł22.54 tax excl.
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It supports the operation of batteries with a nominal voltage of 3.7 V and allows for charging with a current of up to 200 mA. There is a JST PH2.0 connector on the board to connect the cell and a charging switch. The current is supplied to the board through the USB connector of the QT Py board. Full documentation is available on the product page.
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
Evaluation board with ATSAMD21E18 microcontroller (Cortex M0 +, 48 MHz, 256 KB Flash and 32 KB RAM). Equipped with a STEMMA QT connector. Adafruit 4600
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
Board with WiFi Espressif ESP32-S2 module and u.FL connector. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5348
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
No product available!
A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
No product available!
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector.
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397