MP2636 Power Booster & Charger - LiPo charger module with MP2636 chip
ID: 565927
zł38.88
Tax included
zł31.61 tax excl.
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with a 5V output available on the USB Type A connector, so it can be used as a power bank. The battery is connected to the board via the JST PH2.0 connector or soldered to the pads, and the battery charging source via the microUSB connector. The charging status and the power output are indicated by the LED diodes on the board. The module has a small size, which makes it suitable for projects of small IoT devices.
Features
- Input voltage in charging mode (VIN): 4.5 to 6.0V
- Output voltage (VOUT): 5V
- Works with a 4.2V battery (3.7V lithium battery, 4.2V fully charged)
- Maximum charging current: 2.5 A
- Maximum output current: 2.5 A
- Switching frequency: 600KHz
- Charging Mode Efficiency:> 90%
- Boost Mode Efficiency:> 90%
- Protection against battery overcharging
- Overheating protection: 150 ℃
- Dimensions: 35 x 30 mm
- Weight: 12 g
565927
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.35
24h
Available quantity: 27
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 17
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.70
24h
Available quantity: 69
Available
2-wire cable, 30 cm long, with a JST PH-2.0 female plug at one end
zł1.21
24h
Available quantity: 6
Available
Other products in the same category (16)
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
zł95.10
24h
Available quantity: 1
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł33.16
24h
Available quantity: 2
Available
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
zł50.50
24h
Available quantity: 2
Available
A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893
zł51.30
24h
Available quantity: 1
Available
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
zł142.31
24h
Available quantity: 1
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
zł66.06
24h
Available quantity: 1
Available
ToolkitRC M8D is an advanced, dual-channel charger for 1-8S LiPo batteries, with a maximum current of 30A per channel, offering a wide input voltage range from 10V to 49V. Equipped with a 2.4-inch TFT display and various operating modes, it allows precise monitoring and control of the charging process.
zł624.32
24h
Available quantity: 10
Available
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
zł1.89
24h
Available quantity: 194
Available
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
zł38.20
24h
Available quantity: 3
Available
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
zł12.53
24h
Available quantity: 8
Available
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł24.70
24h
Available quantity: 2
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł16.20
24h
Available quantity: 7
Available
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
zł43.87
24h
Available quantity: 10
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł26.75
24h
Available quantity: 3
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.87
24h
Available quantity: 9
Available
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
zł4.48
24h
Available quantity: 96
Available
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446