![LiPo Amigo Pro - LiPo and LiIon battery charger module LiPo Amigo Pro - LiPo and LiIon battery charger module](https://kamami.pl/64085-large_default/lipo-amigo-pro-lipo-and-liion-battery-charger-module-pim612.jpg)
![LiPo Amigo Pro - LiPo and LiIon battery charger module LiPo Amigo Pro - LiPo and LiIon battery charger module](https://kamami.pl/64085-large_default/lipo-amigo-pro-lipo-and-liion-battery-charger-module-pim612.jpg)
zł35.69 tax excl.
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Charger module based on the popular MCP73831 chip. It is dedicated to charging single-purpose LiPo and LiIon batteries with a nominal voltage of 3.7 V with a maximum charging current of 200 mA in the default mode or 500 mA in the Fast Charge mode. The cells are connected to the board via the JST-PH connector, and the charging source via the USB type C connector. The board also has a charging LED. The user can power the external device during charging thanks to the 4.2 V output on the second JST-PH connector. In addition, the charger has a built-in overheating and overcharging protection in the form of the XB6096I2S chip. The module is small in size. It can be used both as a separate charger for small LiPo and LiIon cells, as well as as an element of a larger project.
Li-Po battery 3.7V / 450mAh, PCM, connector + jack 2.54 JST-BEC, 2 pins, cable length 150mm. Akyga LP403045
No product available!
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
No product available!
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
No product available!
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
No product available!
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
No product available!
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612