zł101.51 tax excl.
Wio-WM1302 LoRaWAN Gateway Module (SPI) US915-M Seeed Studio 114992969 is a mini-PCIe format module based on the SX1302 chip, designed for building LoRaWAN gateways in the US915 band. Thanks to its low power consumption, high sensitivity, and SPI interface, it is well suited for IoT and M2M applications requiring reliable long-range communication.
The Wio-WM1302 module in the SPI version and US915 band is a new generation of LoRaWAN gateway modules in mini-PCIe format, based on the Semtech® SX1302 baseband chip. It features low power consumption, high sensitivity, and optimized operating temperature, eliminating the need for additional cooling. Thanks to the 52-pin golden finger connector, the module can be easily integrated into LPWAN gateway devices.
It supports reception with sensitivity up to -139 dBm (SF12, 125 kHz) and transmission with power up to 25 dBm at 3.3 V supply. Compared to earlier SX1301 and SX1308 chips, it delivers higher performance and lower power consumption. CE, FCC, and TELEC certifications simplify the certification process of finished devices. The module is intended for use in M2M, IoT, and LPWAN gateways as well as in research projects on long-range communication.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
Radio module with 868 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0115
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
No product available!
Module with the SX1276 868 MHz system for LoRa communication, designed for FireBeetle boards. It communicates via the SPI interface. DFRobot TEL0125
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3
No product available!
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
Development kit with SAMD21G18A microcontroller with ARM Cortex M0+ core and LoRa RFM95W radio communication module. SparkFun WRL-15836
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
No product available!
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
No product available!
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
LoRa radio module with 433 MHz operating frequency. Communication takes place via the SPI serial interface. It is supplied with the voltage of 3.3 V
Wio-WM1302 LoRaWAN Gateway Module (SPI) US915-M Seeed Studio 114992969 is a mini-PCIe format module based on the SX1302 chip, designed for building LoRaWAN gateways in the US915 band. Thanks to its low power consumption, high sensitivity, and SPI interface, it is well suited for IoT and M2M applications requiring reliable long-range communication.