AVT3056 UK

Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter

Needle bending needle, for precise glue application, Flux 0.25mm internal diameter and 0,5144mm outside diameter

Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter

Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter

Needle bending needle, for precise glue application, Flux 0.81mm internal diameter and 1.26mm outside diameter

Silicone protective case for the Huskylens vision module. It was made of a soft and flexible material, it perfectly fits the shape of the tile. DFRobot FIT0647

Module with a CCS811 air quality sensor for measuring the concentration of carbon dioxide (CO2) and volatile organic compounds (VOC) in the air. It communicates via the I2C interface. DFRobot SEN0339

10.1" LCD IPS display. The display is equipped with a mini HDMI interface for image display and USB for power supply. Resolution 800x1280 pixels. DFRobot DFR0615

Module with 4 relays JZC-11F with a load of 5A. It enables switching devices with high power using a microcontroller. I2C communication. SparkFun COM-16566

Evaluation kit with SiFive Freedom E310 microcontroller with RISC-V (ISA) architecture. It includes 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 microcontroller for USB support and JTAG interface, Qwiic and USB Type-C connector. SparkFun DEV-15594

Cable with a length of 150 mm, on one side terminated with a Qwiic connector, and on the other side with single female goldpin connectors. It allows you to connect Qwiic modules, e.g. with development board. SparkFun CAB-14988

Extension module for Raspberry Pi designed to build the user interface. It is equipped with a 2.4-inch TFT LCD display, microphones, speaker, buttons, joystick and RGB LEDs. SparkFun DEV-16653

Adapter board from SODIMM200-2.5 to 2.54mm connectors

Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071

The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601

Evaluation kit with LittleBee GW1NR9 FPGA. It offers 8640 LUTs, 6480 Flip-Flops (FF), and has a built-in 8MB (64Mb) SDRAM. The board has 8 MB Flash, FTDI for UART, 8 LEDs and a button. TEC0117-01