.png)
- Out-of-Stock
Fiberlogy Easy PLA filament 1.75mm Onyx
ID: 588631
5902560994766
Easy PLA filament in Onyx, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Onyx
Description
Fiberlogy Easy PLA filament in Onyx with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range of 200°C to 220°C, while the table temperature in the range of 50°C to 70°C. When using pads or other adhesion enhancing agents, table heating is not required. The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.
PLA filament is the basic filament used in 3D printing. It is characterized by good durability, and its properties allow precise printing of even complex elements. Easy PLA is a filament that allows you to get very good quality prints, avoiding printing problems. Thanks to its properties, Easy PLA material is recognized by both novice users and professionals. It is biodegradable and has very good adhesion between print layers.
The filament is available in different colors. It can be used to create prototypes, gadgets, toys and decorations.
Filament works great with most 3D printers available on the market. Check out our offer of 3D printers and choose the best set for you.
Features
- Onyx colour
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.02 mm
- Oval tolerance: +0.01 mm
- Printing temperature: 200°C to 220°C
- Table temperature: 50°C to 70°C (when using pads or other adhesion promoters, table heating is not required)
- Net weight: 0.85 kg
- Total weight: 2.5 kg
588631
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,85 kg
- Diameter
- 1,75 mm
- Colour
- Onyx
- Type of packaging
- Spool
Manufacturer
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 Brzezie
- Poland
- [email protected]
Responsible person
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 387 Brzezie
- Poland
- [email protected]
You might also like
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł56.14
24h
Available quantity: 35
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł49.48
24h
Available quantity: 158
Available
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
FiberFlex 40D is a versatile and flexible filament that ensures fast and precise 3D printing. It is ideal for creating durable and flexible components, and its mechanical and chemical properties make it an excellent choice for amateurs and professionals alike. With a variety of colors and ease of printing, FiberFlex 40D will meet the requirements of any project. Fiberlogy FiberFlex 40D Pink
zł124.00
Delivery date unknown
No product available!
Other products in the same category (16)
Banana Pi R1 acrylic clear case. The case needs to be assembled by yourself
Retired
No product available!
The housing for the Banner PI G1 Debugger made of transparent plastic. Housing for self-assembly
Retired
No product available!
The I2C electric level conversion module is specifically designed for Banana Pi. The module converts the 3.3V of I2C electric level to 5V level or converts 5V to 3.3V
Retired
No product available!
BPI AD/DA extend module with the PCF8591 single-chip, single-supply low-power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface
Retired
No product available!
No product available!
5dB antenna for the Banana Pi R1 router in the version with 300Mps wifi and five LAN 100/1000 ports.
Retired
No product available!
STM32F103 programming cable for Open Debugger Burn Board and Banana Pi G1 connection
Retired
No product available!
CC3200 programming cable for Open Debugger Burn Board and Banana Pi G1 connection
Retired
No product available!
CC2530 and CC2540 programming cable for Open Debugger Burn Board and Banana Pi G1 connection
Retired
No product available!
It is a standard audio-video cable, which can be successfully used to connect Banana Pi M1 or Raspberry Pi 1 model B and A. Cable length is 98 cm, has two ends of the chinch type.
Retired
No product available!
COM-11964 Button a white economy grade 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a long life horizontal microswitch.
Retired
No product available!
Cobbler Plus - adapter enabling connection of GPIO Raspberry Pi A +, B + and Pi 2 lines to the contact plate (2.54 mm). The version is assembled. Adafruit 2029
Retired
No product available!
T-Cobbler Plus - adapter enabling connection of GPIO Raspberry Pi A +, B + and Pi 2 lines to the contact plate (2.54 mm). Goldpin connectors are included, for self-assembly. Adafruit 1989
Retired
No product available!
FPC tape length 250 mm, 50 lines, pitch 0.5 mm. Adafruit 1682
Retired
No product available!
μHex is the first low-power controller which is compatible with Arduino. It is very suitable for the battery power supply environment. A 210mAh CR2032 cell battery could make it work 60 days long. DFR0343
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Delivery date unknown
No product available!
Easy PLA filament in Onyx, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Onyx