- Out-of-Stock
Fiberlogy Easy PLA filament in Navy Blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range of 200°C to 220°C, while the table temperature in the range of 50°C to 70°C. When using pads or other adhesion enhancing agents, table heating is not required. The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.


PLA filament is the basic filament used in 3D printing. It is characterized by good durability, and its properties allow precise printing of even complex elements. Easy PLA is a filament that allows you to get very good quality prints, avoiding printing problems. Thanks to its properties, Easy PLA material is recognized by both novice users and professionals. It is biodegradable and has very good adhesion between print layers.
The filament is available in different colors. It can be used to create prototypes, gadgets, toys and decorations.
Filament works great with most 3D printers available on the market. Check out our offer of 3D printers and choose the best set for you.
Data sheet
Manufacturer
Responsible person
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
White MattFlex 40D filament with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy MattFlex 40D White
No product available!
FiberWood filament in Brown color with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy FiberWood Brown
No product available!
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
No product available!
Module with five reflection sensors. It has digital outputs and, thanks to the built-in microcontroller, enables calibration. Auto-Calibrating Line Sensor LSS05
No product available!
Audio player with built-in MP3 codec and microSD card slot. It communicates via the UART interface or is controlled by 3 buttons on the board. Cytron SHIELD-EZMP3
No product available!
No product available!
SmartDriveDuo MDDS30 - two-channel driver for DC motors
No product available!
No product available!
Expansion board for STM32 Nucleo based on the STSAFE-A110 data security element. The board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-SAFEA1A
No product available!
Expansion board for STM32 Nucleo designed for applications using USB Type-C. The board is compatible with STM32 Nucleo and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-USBPDM1
No product available!
No product available!
ODYSSEY X86J4105800 redefines the SBC (Single Board Computer) with Arduino Coprocessor onboard, enabling IoT (Internet of Things) easier than before. Seeed Studio 102110399
No product available!
ODYSSEY X86J4105864 redefines the SBC (Single Board Computer) with Arduino Coprocessor onboard, enabling IoT (Internet of Things) easier than before. Seeed Studio 102110398
No product available!
Audio cable with 3.5 mm 3-pin minijack and 2x RCA (chinch), 1,5 m length. GEMBIRD CCA-458
No product available!
OLED Longlife alphanumeric display 2x20 characters, text color yellow on a black background. Winstar WEH002002ALPP5N00008
No product available!
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
No product available!
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+
No product available!
The WEP 900H soldering station is a tip soldering iron with temperature control. The heat is obtained as a result of the induction process, thanks to which the set temperature on the cave is quickly reached, and after heating the tip cools quickly. It is designed for soldering elements made in lead-free technology (lead free). WEP 900H
No product available!
Easy PLA filament in Navy Blue, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Navy Blue