- New
zł113.01 tax excl.
MeshTadpole SX1262 USB-A radio adapter for LoRa communication on computers and Raspberry Pi single-board computers. Enables the creation of a Meshtastic node using meshtasticd software and integration with MeshCore networks through openHOP on Linux. Features an SX1262 transceiver operating in the 850-930MHz frequency range, with up to 22dBm transmission power and an SMA antenna connector. Built-in EEPROM supports automatic configuration in meshtasticd version 2.6.5 and later. Equipped with a USB Type-A connector and ESD protection, supplied with a 915MHz antenna. Elecrow PDE25801P
MeshTadpole SX1262 USB Stick enables the connection of a LoRa transceiver to a computer or single-board computer through a USB Type-A port. The adapter allows users to set up a Meshtastic network node using meshtasticd software without requiring a separate microcontroller development board. The device uses the connected computer's resources to manage radio communication, transmit messages, and exchange data over mesh networks. Applications include stationary Meshtastic nodes, radio repeaters, and communication projects based on Raspberry Pi and Linux computers.
Radio transmission is handled by the Elecrow LR1262 module with a Semtech SX1262 transceiver, supporting frequencies from 850MHz to 930MHz and a maximum transmission power of 22dBm. The adapter features an SMA antenna connector, ESD protection for the USB port and RF circuitry, and a Texas Instruments LDO voltage regulator with a high power supply rejection ratio (PSRR). The design reduces the impact of power supply noise on radio reception. Its compact dimensions allow two adapters to be connected simultaneously to adjacent USB ports on a computer or Raspberry Pi.
The built-in EEPROM stores configuration information used for automatic device detection by meshtasticd version 2.6.5 and later. The adapter comes with pre-flashed firmware. It works with meshtasticd on Linux, Windows, and macOS computers, as well as openHOP Repeater, which enables a Linux computer to operate as a MeshCore-compatible node. Supported software also includes meshOS. Configuration instructions are available in the Meshtastic documentation.
Warning!
The module operates in the US915 frequency plan, covering the 902-928MHz range. US915 frequency plan does not comply with the conditions applicable to LoRaWAN network operation in Poland and other European Union countries. Radio equipment may only operate within permitted frequency ranges.
Manufacturer
Responsible person
The LoRa gateway based on the BCM2711 processor (ARM Cortex-A72, 1.5 GHz) with 8 GB RAM and 64 GB of memory on a micro SD card provides high performance and spaciousness, ideal for supporting IoT applications. Equipped with 4G/LTE communication, GNSS, HDMI and Gigabit Ethernet ports, and support for LoRa WAN (868 MHz), it offers reliable communication in harsh industrial conditions, and its IP65 housing guarantees protection against atmospheric factors. Edatec ED-GWL2110-0864-EU
No product available!
A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064
Advanced ESP32-based communication module with Wi-Fi and Bluetooth 4.2 support, equipped with LoRa SX1276 chip for long-range transmission in the 868 MHz band. Integrated NEO-6M GPS module and 0.96" OLED display enable real-time location and data viewing, and built-in 18650 cell cage provides mobility and energy independence. T-Beam V1.2 is ideal for projects based on mesh networks, providing reliable connectivity in field and IoT applications. LILYGO TTGO Meshtastic T-Beam V1.2
No product available!
LoRa RF transceiver module operating in the ISM band below 1GHz, featuring a UART interface and built-in antenna, used for long-range wireless data transmission. REYAX RYLR998
No product available!
Compact and energy-efficient Meshtastic, MeshCore node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, power supply from USB-C, solar panel or battery (built-in 2000mAh battery), and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993649
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710
A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201
No product available!
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648
No product available!
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633
No product available!
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 410-510MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and integrated TCXO. LF version with pre-soldered pin headers. Waveshare Core1121-LF-M
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 410-510MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and integrated TCXO. LF version without pre-soldered pin headers, intended for soldered mounting. Waveshare Core1121-LF
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 850-930MHz and 2.4GHz bands, with SPI interface, AES-128 encryption and an integrated TCXO oscillator. HF version with pre-soldered pin headers. Waveshare Core1121-HF-M
Dual-band LoRa communication module based on the LR1121 transceiver, supporting Sub-GHz 850–930 MHz and 2.4 GHz bands, featuring SPI interface, AES-128 encryption, and an integrated TCXO. HF version without pre-soldered pin headers, intended for soldered mounting. Waveshare Core1121-HF
Seeed Studio 114993187 is an LPWAN Asset Tracker development kit based on the Wio-WM1110 module, supporting the Amazon Sidewalk network. With integrated GNSS, Wi-Fi, and Bluetooth, it enables precise asset tracking, while built-in sensors and compatibility with Grove modules provide extensive capabilities for IoT applications and monitoring systems.
MeshTadpole SX1262 USB-A radio adapter for LoRa communication on computers and Raspberry Pi single-board computers. Enables the creation of a Meshtastic node using meshtasticd software and integration with MeshCore networks through openHOP on Linux. Features an SX1262 transceiver operating in the 850-930MHz frequency range, with up to 22dBm transmission power and an SMA antenna connector. Built-in EEPROM supports automatic configuration in meshtasticd version 2.6.5 and later. Equipped with a USB Type-A connector and ESD protection, supplied with a 915MHz antenna. Elecrow PDE25801P