

zł107.50 tax excl.
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 150 rpm, torque 1,3kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2382
Pololu DC motor equipped with a 150:1 metal gear ratio. The motor of the set is designed for 6 V supply and generates a torque of 1,3 kg*cm. The current consumed by the loaded motor is about 40 mA, while the maximum current consumed under load is 670 mA. The motor has an extended shaft on the opposite side of the motor, which makes it easy to install an encoder or other shaft position sensor. In this set, the manufacturer used the HPCB series engine, which means that it is equipped with carbon brushes. It is much more durable than brushes made of metal plates used so far. The gearbox has a D-shaped output shaft with a diameter of 3 mm, which simplifies the installation of the further part of the drive system.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A small medium power motor with 210:1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 100 RPM speed and a maximum torque of 1.7 kg*cm. Pololu 2369
No product available!
A small medium-power motor with a 380: 1 metal gear, 6 V operating voltage, 0.04 A to 0.67 A power consumption, 57 RPM and a maximum torque of 3.6 kg * cm. Pololu 4792
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
150:1 Micro Metal Gearmotor HP
A small, high power motor with a 50: 1 metal gear, 12 V operating voltage, 0.06 A to 0.75 A power consumption, 650 RPM speed, maximum torque of 0.67 kg * cm and carbon brushes with increased durability. Pololu 3039
No product available!
Small metal gear motor, 20 RPM speed, 6V operating voltage. GA12-N20-0010
Small metal gear motor, 20 RPM speed, 12V operating voltage. GA12-N20-0019
No product available!
Miniature high-power motor from the Pololu MP series. 100: 1 gear motor,
the rotation speed of the shaft is 220 rpm, the torque is 1.5 kg * cm (0.15 Nm).
The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2381
250:1 Micro Metal Gearmotor
No product available!
Small metal gear motor, 15 RPM speed, 3V operating voltage. GA12-N20-0001
No product available!
298:1 Micro Metal Gearmotor with Extended Motor Shaft
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
15:1 Micro Metal Gearmotor HP with Extended Motor Shaft
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 290 RPM and 40 mA with no load, 17 oz-in (1.2 kg-cm) and 0.7 A at stall.
Pololu high power miniature motor with carbon brushes. 150:1 gear motor, shaft speed 150 rpm, torque 1,3kg*cm. The motor has an extended shaft, which makes it easy to attach the encoder. Pololu 2382