

zł298.38 tax excl.
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15733
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. Determining the position with the help of the module allows to achieve an accuracy of up to 1.5 m. The NEO-M9N module detects jamming and forgery events. In addition, it is equipped with a SAW (Surface Acoustic Wave) filter, which, in combination with LNA (Low Noise Amplifier), enables normal operation even with strong signal interference.
The module has a Qwiic connector with an I2C interface. Additionally, for users who do not work with the Qwiic system, UART, I2C and SPI interfaces were provided on pins with a 2.54 mm raster. There is also a socket on the board with a battery supporting the voltage, which significantly accelerates the start of the device after a momentary power failure. Module has integreted chip antena.
The module is configured via a USB connector and a dedicated u-center application. The module is also available with the Arduino library with numerous examples of use.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15712
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
Module with a GPS PA1010D receiver with a built-in ceramic antenna. It can download data from the most popular navigation systems: GPS, GLONASS, GALILEO. Pimoroni PIM525
No product available!
GPS module with u-blox ZED-F9R system. It uses Automotive Dead Reckoning (ADR) technology. It provides highly accurate and continuous positioning by combining the 3D IMU sensor, vehicle dynamics model, correction data and GNSS measurements. SparkFun GPS-22660
No product available!
Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415
GNSS receiver module dedicated to Raspberry Pi minicomputers. It provides simultaneous reception of up to three types of satellite systems, including GNSS with GPS, Beidou, Galileo and GLONASS. Waveshare NEO-M8Q GNSS HAT
No product available!
The module is equipped with the LTE-M/NB-IoT u-blox SARA-R510M8S system. It allows you to monitor devices remotely. SparkFun GPS-18031
No product available!
GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports fast, dual-band RTK positioning. Waveshare LC29H(DA) GPS/RTK HAT
The GPS module allows you to download the current coordinates of position and time, has a built-in GPS receiver FGPMMOPA6H. MOD-54
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-17285
No product available!
LC76G GNSS receiver module. It can receive data from GPS, GLONASS, Galileo, BDS and QZSS systems. It uses a UART or I2C interface and offers an accuracy of up to 1.5m. Waveshare LC76G GNSS Module
Adafruit 1272 - Adafruit Ultimate GPS Logger Shield - Includes GPS Module
No product available!
A GNSS module that combines the precise u-blox ZED-F9P receiver with the NEO-D9S L-band GNSS correction data receiver. Provides high-accuracy positioning without the need for separate RTK or NTRIP corrections. SparkFun GPS-22560
No product available!
GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286
No product available!
GPS module with 72-channel GNSS NEO-M8P-2 receiver. It can receive data from GPS, GLONASS and BeiDou systems. It has USB, UART, I2C and SPI interfaces. RTK and high accuracy up to 25mm. SparkFun GPS-15005
No product available!
Advanced precision positioning tool based on Septentrio\'s mosaic-X5 multi-constellation GNSS receiver, achieving 6 mm RTK accuracy. Supports GNSS signals from various systems, such as GPS, GLONASS, Galileo, Beidou, NavIC and L-band corrections, offering a position update rate of up to 100 Hz, making it ideal for robotic applications. The kit includes an internal web server for configuration, a National Geodetic Survey-certified GNSS antenna and a rugged aluminum housing for easy installation and reliability in harsh environments. SparkFun GPS-23748
No product available!
GPS module with built-in antenna. It can provide location, speed and accurate time information using standard NMEA-0183 protocol. SparkFun GPS-19166
No product available!
Wio development kit equipped with LTE 4G communication and a GNSS satellite navigation module. Seeed Studio 102991022
GPS module with NEO-M9N 92-channel GNSS receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART, I2C and SPI interfaces. SparkFun GPS-15733