- Out-of-Stock
Computer with Intel Pentium Silver N6005 quad-core processor with clock frequency up to 3.3 GHz. Equipped with two DDR4 memory slots, M.2 PCIe and eMMC. It has numerous communication connectors including USB, SATA, RJ45 Ethernet, and HDMI and DisplayPort video outputs. Hardkernel Odroid H3+
Odroid H3+ computer with a quad-core Intel Pentium Silver N6005 processor clocked at 2GHz (overclockable to 3.3GHz) and Intel UHD Graphics 32 EUs Turbo 900MHz. The processor is made with 10nm technology and has a 1.5MB L2 cache and a 4MB L3 cache. It offers an Unlimited Performance feature that allows the processor to run in turbo boost mode. The ODROID H3+ has the same dimensions and similar power efficiency as the ODROID-H2+ and is compatible with the previous version. The H3+ version, however, offers higher performance.
The minicomputer is equipped with two DDR4 PC4-23400 memory slots with up to 32GB per slot (64GB total) and a transfer rate of 2933MT/s. RAM is not included. The Odroid H3 offers numerous memory interfaces, including an eMMC slot, two SATA3 3.0 slots and an M.2 PCIe 3.0 slot with NVMe drive support (with Key M connector). In addition, communication interfaces are brought out on the board, including two RJ45 Ethernet 2.5Gbit ports , two USB 3.0 and two USB 2.0 slots, and a 24-pin connector with UART, I2C, HDMI CEC and additional USB 2.0 interfaces. Audio interfacing is provided by a 3.5mm jack output and SPDIF output, as well as a 3.5mm jack input, and video can be transmitted via HDMI 2.0 or DisplayPort 1.2 output. A dedicated battery is responsible for maintaining BIOS and RTC power.

| A. CPU Intel Pentium Silver N6005 | J. HDMI 2.0 |
| B. 2 x SO-DIMM DDR4 | K. DisplayPort 1.2 |
| C. M.2 PCIe | L. RJ45 Ethernet |
| D. eMMC | M. LED |
| E. 2 x SATA power | N. Expansion |
| F. SATA3 6.0 Gb/s | O. Power switch |
| G. Power | P. Reset |
| H. 2 x USB 3.0 | Q. Backup battery |
| I. 2 x USB 2.0 | R. Fun connector |
| S. Audio |
A large heat sink with a metal casing is responsible for proper cooling. Additionally, the user can connect an external fan and control it via a dedicated 4-pin connector. Odroid H3 provides high efficiency and can be an ideal base, for example, for building home multimedia centers. Full documentation and configuration examples are available on the product page.
Manufacturer
Responsible person
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a fan and two slots for a 3.5" SATA drive. Hardkernel ODROID-H3 Case Type 1
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with space for a fan and two slots for a 2.5" SATA drive. Hardkernel ODROID-H3 Case Type 3
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with space for a 3.5" SATA drive or two 2.5" SATA drives. Hardkernel ODROID-H3 Case Type 4
Self-assembly case designed for minicomputers Odroid H3 and Odroid H3+. Equipped with a fan, a slot for a network card and two slots for a 3.5" SATA drive. Hardkernel ODROID-H3 Case Type 5
Module with five reflection sensors. It has digital outputs and, thanks to the built-in microcontroller, enables calibration. Auto-Calibrating Line Sensor LSS05
No product available!
Audio player with built-in MP3 codec and microSD card slot. It communicates via the UART interface or is controlled by 3 buttons on the board. Cytron SHIELD-EZMP3
No product available!
No product available!
SmartDriveDuo MDDS30 - two-channel driver for DC motors
No product available!
No product available!
Expansion board for STM32 Nucleo based on the STSAFE-A110 data security element. The board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-SAFEA1A
No product available!
Expansion board for STM32 Nucleo designed for applications using USB Type-C. The board is compatible with STM32 Nucleo and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-USBPDM1
No product available!
No product available!
ODYSSEY X86J4105800 redefines the SBC (Single Board Computer) with Arduino Coprocessor onboard, enabling IoT (Internet of Things) easier than before. Seeed Studio 102110399
No product available!
ODYSSEY X86J4105864 redefines the SBC (Single Board Computer) with Arduino Coprocessor onboard, enabling IoT (Internet of Things) easier than before. Seeed Studio 102110398
No product available!
Audio cable with 3.5 mm 3-pin minijack and 2x RCA (chinch), 1,5 m length. GEMBIRD CCA-458
No product available!
OLED Longlife alphanumeric display 2x20 characters, text color yellow on a black background. Winstar WEH002002ALPP5N00008
No product available!
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
No product available!
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+
No product available!
The WEP 900H soldering station is a tip soldering iron with temperature control. The heat is obtained as a result of the induction process, thanks to which the set temperature on the cave is quickly reached, and after heating the tip cools quickly. It is designed for soldering elements made in lead-free technology (lead free). WEP 900H
No product available!
The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D
No product available!
Computer with Intel Pentium Silver N6005 quad-core processor with clock frequency up to 3.3 GHz. Equipped with two DDR4 memory slots, M.2 PCIe and eMMC. It has numerous communication connectors including USB, SATA, RJ45 Ethernet, and HDMI and DisplayPort video outputs. Hardkernel Odroid H3+