.png)
- Out-of-Stock
Orange Pi Zero Plus2 H5
ID: 564700
Allwinner H5 Quad-core, 512MB DDR3, 8GB eMMC, Bluetooth, Wi-Fi, HDMI
Description
It’s an open-source single-board computer. It can run Android 5.1(H5 version), Ubuntu, Debian, Raspbian Image, it uses the AllWinner H5 SoC, and has 512MB DDR3 SDRAM.
Orange Pi Zero Plus2 is for anyone who wants to start creating with technology – not just consuming it. It's a simple, fun, useful tool that you can use to start taking control of the world around you. What you can do with Orange Pi Zero Plus2: Build a computer, a wireless server, games, music and sounds, HD video, a speaker, Android, Scratchand pretty much anything else, because Orange Pi Zero Plus2 is open source.
Features
- CPU: H5: Quad-core Cortex-A53
- GPU: H5: Mali450 GPU
- Memory (SDRAM): 512MB DDR3 (shared with GPU)
- Onboard Storage: TF card (Max. 32GB) /eMMC flash(8GB)
- Onboard WIFI: AP6212, IEEE 802.11 b/g/n,BT4.2
- Video Input:
- A CSI input connector Camera
- Supports 8-bit YUV422 CMOS sensor interface
- Supports CCIR656 protocol for NTSC and PAL
- Supports SM pixel camera sensor
- Supports video capture solution up to 1080p@30fps
- Video Outputs:
- Supports HDMI output with HDCP
- Supports HDMI CEC
- Supports HDMI 30 function
- Power Source: USB OTG can supply power
- GPIO(1x3) pin: UART, ground.
- Buttons: Power Button
- Low-level peripherals:
- 26 Pins Header,compatible with Raspberry Pi B+
- 13 Pins Header,with 2x USB, IR pin, AUDIO(MIC, AV)
- LED: Power led & Status led
- Supported OS: Android, Ubuntu, Debian, Raspbian Image
- Product size: 46 mm × 48mm
- Weight: 36g
Kit content:
- Orange Pi Zero Plus2 H5
- Wi-Fi Antenna
564700
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
EXtreme CC31MU microUSB 3.1A power supply / car charger with an additional USB socket, allows you to charge phones, navigation, mp3 / mp4 players and connect Raspberry Pi computers
Regular pricezł19.90zł14.88
24h
Available quantity: 3
Available
Power adapter for Raspberry Pi 5V / 2,5A from Akyga with microUSB connector. Made of high quality material. It has protection against overcharging and overvoltage. The cable length is 1.5 m.
zł36.53
24h
Available quantity: 6
Available
The 10 W AC adapter provides 5 V and 2 A current. It is equipped with a 1 m cable with microUSB plug. Akyga AK-TB-23
zł26.90
Delivery date unknown
No product available!
Other products in the same category (16)
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 50 W
Retired
No product available!
SpaceSOM series module with NXP i.MX8M plus 1.8 GHz processor (4 Cortex-A53 + Cortex-M7 cores), 2 GB RAM and 8 GB eMMC memory. SomLabs SLS35X8MPQC_1800C_02GR_08GE_0SF_C
Retired
No product available!
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
Retired
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
Retired
No product available!
Kit with NVIDIA Jetson Xavier NX module (with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics). It has LPDDR4 8GB RAM memory, Ethernet interface, HDMI and MIPI-CSI camera connectors. A 128GB SSD is included. Auvidea JNX30D-NX8-128GB
Retired
No product available!
The 7-color ACeP e-Paper display has a diagonal of 7.3" and a resolution of 800x480 px. Communicates via SPI interface. No PCB. Waveshare 7.3inch e-Paper (F)
Retired
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Retired
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
Retired
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Flower
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Moon
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Pacific
Retired
No product available!
Filament from ROSA3D made of high-quality ABS pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill ABS+ Black
Retired
No product available!
Allwinner H5 Quad-core, 512MB DDR3, 8GB eMMC, Bluetooth, Wi-Fi, HDMI