Expansion Shield X200 for Raspberry Pi B+ and Pi 2

Expansion Shield X200 for Raspberry Pi B+ and Pi 2

Introduction:

The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.

Specyfication:

• Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the
• Raspberry Pi
• VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
• Audio: 3.5mm MIC in jack
  • 3.5mm stereo audio jack
  • SPDIF output
  • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
• Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
  • IR sensor (38KHz)
• USB Storage: Self-powered USB hub with 3 ports
• Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
• GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits
• which require more current
• Misc: Power output socket
  • Camera flex slot so camera can still be used with the expansion board attached
  • DIP switch to remove connection from RPi’s pin header
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins
  • No wiring nor soldering is required
  • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
• Dimensions: 85 x 56mm (Same size as Raspberry Pi)

Shipping list:

• X200 Raspberry Pi expansion board x1
• HDMI adapter x1
• USB adapter x1
• 2.4GHz WIFI antenna x1
• nylon spacers (M3 x 20mm) x4
• nylon screws (M3 x 6mm) x8

Documents:

• Driver Download and User Manual