TT motor with plastic gearbox and encoder

A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124

Solarbotics GM8 143:1 Gear Motor Offset Output

Solarbotics GM10 81:1 Geared Pager Motor

DC motor equipped with a gear ratio 120: 1, powered by 6V with a torque of 0.8 kg * cm (0.08 Nm). The current consumed by the unloaded motor is about 170mA, while the maximum current drawn under load is 2.8A. It has an integrated quadrature encoder. DFRobot FIT0450

A small motor with a plastic 120:1 gear, the output shaft at an angle of 90°, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1123

High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512

High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511

Solarbotics GM3 224:1 Gear Motor 90 deg. Output

Tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. 500 RPM and 45 mA free-run, 8 oz-in (0.6 kg-cm) and 400 mA stall. Pololu 2358

This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.

A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122

This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.

DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder

This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.

Motor with plastic gear 228:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 45 RPM and a maximum torque of 7.2 kg*cm. Pololu 1118

DC motor with a two-sided shaft with built-in 48: 1 gearbox.