Hantek 2D72 - 2-channel portable 70MHz oscilloscope with signal generator
ID: 1183449
5906623476268
zł855.00
Tax included
zł695.12 tax excl.
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with 70 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek 2D72
Description
Portable digital oscilloscope with built-in signal generator and multimeter. It features a 2.8" TFT LCD display with 320x240 pixel resolution and adjustable contrast. It has two measurement channels and features good performance, including 70 MHz bandwidth, 250 MSa/s sampling rate and 6K memory buffer. In addition, the oscilloscope offers a single-channel signal generator with waveform frequencies up to 25 MHz, which has the ability to generate sine wave, rectangular signal, triangular signal and noise. It also allows the device to be used as a multimeter to measure AC and DC voltage, AC and DC current, resistance and capacitance. It is powered by a built-in rechargeable battery and charged via a USB Type C connector. It is a useful measurement tool widely used in various fields such as communications, aerospace, embedded systems, computers, research and education.
Features
Oscilloscope
- Number of channels: 2
- Sampling frequency: 250GSa/s (single channel) 125MSa/s (two channels)
- Resolution: 8 bits
- Triggering
- Type: per edge
- Mode: auto, normal, single
- Level: ±4 divisions from the center of the screen
- Trigger level accuracy: 0.2div × volts/div within ±4 divisions from the center of the screen
- Slope: rising, falling, rising and falling
- CH1/CH2 source
- Input
- DC, AC or GND coupling
- Input impedance: 25pF±3 pF, 1MΩ±2%
- Probe attenuation: 1X, 10X
- Supported probe attenuation coefficients: 1X, 10X, 100X, 1000X
- Maximum input voltage: 150VRMS
- Horizontal
- Sampling frequency range: 250MSa/s (single channel), 125MSa/s (dual channel).
- Waveform interpolation: (sin x)/x
- Record length: max. 6K for single channel; 3K for two channels
- SEC/DIV: range 5ns/div~500s/div 1, 2, 5 sequences
- Vertical:
- A/D converter with 8-bit resolution, each channel sampled simultaneously
- VOLTS/DIV: range of 10mV/div~10V/div on BNC input
- Bandwidth limitation: 20MHz
- Low frequency characteristics: (-3db) ≤10Hz on BNC
- Rise time on BNC: ≤5ns
- DC gain accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
- Measurement
- Voltage difference between cursors △V
- Time difference between cursors △T
- Automatic measurement: frequency, period
Generator
- Number of channels: 1
- Sampling frequency: 250MSa/s
- Vertical resolution: 12 bits
- Maximum frequency: 25 MHz
- Standard waveforms: sine, square, ramp, exp, noise, DC
- Frequency range:
- Sin: 1 Hz to 25 MHz
- Rectangular signal: 1 Hz to 10 MHz
- Triangular signal: 1 Hz to 1 MHz
- Wavelength: 512Sa
- Output amplitude: 5Vp-p (high impedance), 2.5Vp-p (50Ω)
- Output impedance 50 Ω
Multimeter
- Maximum resolution: 4000
- Maximum input voltage AC: 600V, DC: 600V
- Maximum input current AC: 10A, DC: 10A
- Input impedance 10MΩ
- DC voltage: 400.00mV, 4V, 40V, 400V ± (0.8% + 5), 600V ± (1% + 2)
- AC voltage 4V, 40V, 400V ± (1.2% + 5), 600V ±(1.5% + 5)
- DC current: 40mA ± (1% + 2), 200mA ± (1.5% + 2), 4A ± (1.8% + 2), 10A ± (3% + 2)
- Alternating current: 40mA ± (1.3% + 2), 400mA ± (1.8% + 2), 10.00A ± (3% + 5)
- Resistance: 400Ω ±(1% + 3), 4KΩ, 60KΩ, 400KΩ, 4MΩ ±(1.2% + 5), 40MΩ ± (1.5%±3)
- Capacitance: 40nF, 400nF, 4uF, 40uF, 100uF ±(3% + 5)
- Diode test: 0V to 1V
- On-Off: <50Ω
General parameters
- TFT color LCD display with 2.8" diagonal and 320 x 240 pixel resolution with contrast adjustment
- Power supply:100V-240VAC, 50Hz-60Hz; DC input: 5VDC, 2A
- Power consumption:<2.5W
- T-fuse, 3A
- Rechargeable battery: 2600mA x 2
- Operating temperature: 0 to 50 °C
- Dimensions: 199 x 98 x 40 mm
- Weight: 624 g
Kit contains
- Oscilloscope
- Test leads
- USB power supply
- Cables for multimeter
1183449
Data sheet
- Type of oscilloscope
- Portable
- Bandwidth
- 70 MHz
- Sampling rate
- 250 MS/s
- Memory depth
- 6 Kpts
- Number of channels
- 2
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł24.46
Delivery date unknown
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł30.58
Delivery date unknown
No product available!
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł103.20
24h
Available quantity: 1
Available
Other products in the same category (16)
2-channel portable digital oscilloscope with a frequency band of 100 MHz. It uses a single ADC with a maximum sampling rate of 1 GSa/s and a memory module with a depth of 12 Mpts. Siglent SHS810X
zł3,277.99
24h
Available quantity: 1
Available
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
2-channel digital tablet oscilloscope. It offers a frequency band of 110 MHz and sampling rates of up to 250 MS/s. It has numerous built-in functions and is easy to use. Comes with the necessary accessories. Hantek TO1112
zł762.33
24h
Available quantity: 2
Available
2-channel digital tablet oscilloscope with a signal generator and a multimeter. It offers a frequency band of 110 MHz and sampling rates of up to 250 MS/s. It has numerous built-in functions and is easy to use. Comes with the necessary accessories. Hantek TO1112D
zł969.82
4 weeks
No product available!
Portable digital oscilloscope with built-in multimeter. It has two measurement channels with a bandwidth of 70 MHz and a sampling rate of 250 MSa/s. Hantek 2C72
zł789.00
24h
Available quantity: 4
Available
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with 40 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek 2D42
zł789.00
24h
Available quantity: 3
Available
2-channel digital tablet oscilloscope with a signal generator and a multimeter. It offers a frequency band of 200 MHz and sampling rates of up to 1 GS/s. It has numerous built-in functions and is easy to use. Comes with the necessary accessories. Hantek TO1202D
zł1,775.00
24h
Available quantity: 1
Available
A 6-in-1 multifunctional measuring tool in the form of an extremely compact and portable device. It combines the functions of an oscilloscope, recorder, multimeter, spectrum analyzer, frequency counter and signal generator. Hantek DSO8202E
zł4,400.01
4 weeks
No product available!
Portable digital oscilloscope with built-in multimeter. It has two measurement channels with a bandwidth of 40 MHz and a sampling rate of 250 MSa/s. Hantek 2C42
zł655.00
24h
Available quantity: 6
Available
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
24h
Available quantity: 1
Available
A portable tablet oscilloscope with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO1004
zł2,588.95
24h
Available quantity: 1
Available
Portable Tablet Oscilloscope with 8-inch LCD display and touch screen. It has two channels and is characterized by good measurement parameters: 200 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO2002
zł2,259.94
24h
Available quantity: 2
Available
4-channel digital tablet oscilloscope with a signal generator and a multimeter. It offers a frequency band of 150 MHz and sampling rates of up to 1 GS/s. It has numerous built-in functions and is easy to use. Comes with the necessary accessories. Hantek TO1154D
zł2,175.01
24h
Available quantity: 2
Available
Portable oscilloscope for automotive applications with a 10.1" LCD display and touchscreen. It has four measurement channels and features good measurement performance: 100 MHz bandwidth, 1 GSa/s sampling rate and 110 Mpts memory buffer. Micsig ATO1004
zł3,889.56
24h
Available quantity: 2
Available
4-channel digital tablet oscilloscope with a signal generator and a multimeter. It offers a frequency band of 250 MHz and sampling rates of up to 1 GS/s. It has numerous built-in functions and is easy to use. Comes with the necessary accessories. Hantek TO1254D
zł2,799.00
24h
Available quantity: 1
Available
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measuring channels with 80 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. It offers a set of functions for automotive diagnostics. Hantek 2D82 AUTO I
zł999.01
24h
Available quantity: 2
Available
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with 70 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek 2D72