Power module for Wemos D1 Mini

Safety system for two Li-Ion cells with 7.4V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 5A. modBMS5A

The 6-55V 200W Step-Up Converter Module is a device that converts a DC input voltage (6-35V) to a higher DC output voltage (6-55V) with a maximum input power of 200W, a maximum input current of 10A and a maximum output current of 7A. It offers a high conversion efficiency of up to 97.6% and it is recommended to keep a margin when operating for long periods to avoid overheating.

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

A cable with a built-in converter that increases the voltage from the USB connector to 12 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug

A step-down converter module that allows for input voltage reduction from 6.1–36V to a stable 6V level, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows for powering microcontrollers, IoT modules, and other electronic systems. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5594

The Step-Down Converter Module converts 0.5V-26V input voltage to 0.8-25V constant, with a maximum output current of 3A, recommended up to 2.3A for long-term use. The conversion efficiency of the device is 96%, and the module size is 22.3mm x 17mm x 4.2mm.

The Step-Down Converter Module converts 4-40V to a regulated output voltage of 1.25-36V, supporting a maximum of 8A and 200W, with a conversion efficiency of 94%. It is a compact device (61 x 41 x 27 mm) using PWM modulation, ideal for industrial applications requiring a stable output voltage.

The protection circuit for one Li-Ion cell with a voltage of 3.2 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 12 A

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output in the form of pads. Allows powering devices with 9V. PDC004

Step-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885

BMS module for two 7.4V lithium cells. Charging, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 20 A

Power switch that enables efficient power management of devices in the Qwiic ecosystem, allowing selective shutdown of devices and energy saving. The module offers I2C bus isolation, additional GPIO pins and works with SparkFun Qwiic Mux, making it easy to control multiple devices in your projects. SparkFun PRT-26784

This step-down converter module allows you to reduce the voltage from 18-60V to a stable 18V at a current of up to 8A. Its high efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5681

The Step-Up converter module with a power of 65W converts the voltage in the range of 3-35V to 3.5-35V with an efficiency of over 96%. Equipped with a voltmeter, it operates in temperatures from -40°C to 85°C.

DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 110 V, 200 V, 220 V or 280 V

The DC-DC Step-down Converter Module with the LM2596S chip allows you to convert the voltage from the range of 3-40 V to a regulated output voltage of 1.5-35 V with high efficiency up to 92%. The maximum output current is 3 A, and the operating frequency is 150 kHz. The compact design with dimensions of 43 × 21 × 14 mm, the possibility of precise voltage regulation and a pinout of 2.54 mm facilitate the integration of the module in DIY projects, power supply systems, modeling and laboratory stations. The operating temperature range is from -40 to 85°C