Gravity: Air Pressure Sensor - MPX5700AP air pressure sensor
ID: 1178453
SEN0456
zł331.66
Tax included
zł269.64 tax excl.
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It allows for quick and accurate measurement of the pressure in the tube, e.g. during experiments. It has a built-in calibration function based on a known pressure value. It is supplied with the voltage from 3.3 to 5.5V and communicates via the I2C interface (Gravity connector). Full documentation is available on the product page.
Features
- Air pressure sensor
- Output signal: I2C interface
- Measuring range: 15 to 700 kPa
- Variation: ＜ 2.5%
- Resolution: ≤1kPa
- Voltage: 3.3 to 5.5 V DC
- Working temperature: 0 to 85 ℃
- Dimensions: 32 x 43 mm
Kit contains
- Gravity: Pressure sensor
- 4-pin Gravity cable
1178453
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Ciśnienia powietrza
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
Delivery date unknown
No product available!
Available
Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322
zł272.05
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł120.68
24h
Available quantity: 2
Available
Pressure sensor module with I2C interface (BMP085)
zł74.90
24h
Available quantity: 6
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 4
Available
Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716
zł91.51
24h
Available quantity: 1
Available
Module with digital barometer BMP388. It measures pressure in the range from 300 to 1250 hPa and communicates via I2C or SPI. Adafruit 3966
zł55.41
24h
Available quantity: 2
Available
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł105.02
24h
Available quantity: 2
Available
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa and communicates via I2C or SPI. Waveshare BMP388 Barometric Pressure Sensor
zł79.37
24h
Available quantity: 2
Available
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
zł50.13
24h
Available quantity: 15
Available
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
zł104.93
24h
Available quantity: 4
Available
Module with a BME688 sensor for measuring gas concentration, pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-19096
zł196.21
24h
Available quantity: 3
Available
Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0516
zł33.91
24h
Available quantity: 3
Available
The module allows the measurement of atmospheric pressure in the range of 260 ... 1260hPa with a resolution of 0.02hPa. It has a built-in stabilizer and translator levels, so you can use it in systems supplied with voltage of 2.5 ... 5.5V. Pololu 2867
zł43.73
24h
Available quantity: 2
Available
LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898
zł40.55
24h
Available quantity: 2
Available
Module with the MS5611 sensor, allowing measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer. It comes with a connector for self-assembly. modGY-63
zł31.34
24h
Available quantity: 8
Available
Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0517
zł49.94
24h
Available quantity: 3
Available
LPS28DFW absolute pressure sensor module. The chip features a wide measurement range of 260 to 1260 hPa or 260 to 4060 hPa and a high accuracy of 0.5 hPa. It communicates via an I2C interface. SparkFun SEN-21222
zł154.12
24h
Available quantity: 2
Available
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456