Qwiic Micro Absolute Digital Barometer - LPS28DFW pressure sensor module

Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0516

Module with digital barometer BMP581. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 5 Pa and communicates via I2C or SPI. SparkFun SEN-20170

Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440

Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812

BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236

Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466

Kit with MPX5700AP pressure sensor, syringe and tube. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020248

LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator

Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335

Module with waterproof barometer and MS5837 temperature sensor. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C

Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257

I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248

Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164

The KAmod BMP280 contains a precise BMP280 sensor manufactured by Bosch Sensortec, which enables the measurement of atmospheric pressure and temperature. All key signals of the miniature BMP280 sensor are routed on the module board, facilitating its use in modular applications. Communication is carried out via SPI or I2C interfaces equipped with voltage level translation circuits.

The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456

Module with a pressure, temperature and humidity sensor based on the MS8607. Equipped with a STEMMA QT connector, it communicates via the I2C. Adafruit 4716