MicroUSB adapter - USB-C (black)

Plastic lens holder with M12x0.5 thread and 12 mm height, intended for Raspberry Pi cameras with interchangeable M12 lens mounts. ArduCam LH003

Metal lens holder with M12x0.5 thread and a height of 16.5 mm, intended for Raspberry Pi cameras with interchangeable M12 lenses, supplied with a mounting gasket. ArduCam U0756M16

Metal lens holder with an M12x0.5 thread and a height of 14.5 mm, intended for Raspberry Pi cameras with an interchangeable lens mount, supplied with a mounting gasket. ArduCam U0756M14

Metal lens holder with an M12x0.5 thread and a height of 13mm, intended for Raspberry Pi cameras with an interchangeable lens mount, supplied with a mounting gasket. ArduCam U0756M13

Metal lens holder with an M12x0.5 thread and a height of 10mm, intended for Raspberry Pi cameras with an interchangeable lens mount, supplied with a mounting gasket. ArduCam U0756M10

Dual-channel GMSL camera adapter based on the MAX9296A deserializer, enabling connection of up to two GMSL cameras to Raspberry Pi 5 and Jetson Orin Nano/NX, intended for high-speed and low-latency video transmission. Waveshare 33623 MAX9296-GMSL-DESER-MODULE

The IMX415 8MP High SNR Low Light Camera Module for Raspberry Pi and Luckfox is a compact CMOS camera with a 95.5° wide-angle lens, delivering high image quality, low noise, and strong low-light performance. Designed for vision systems, AI applications, and CSI-based projects. Waveshare IMX415 8MP Camera (A)

Multi-system GNSS module in HAT form factor for Raspberry Pi, based on the L76K chipset, supporting GPS, BeiDou (BDS), GLONASS, and QZSS, with A-GNSS functionality, designed for precise positioning and navigation. Waveshare L76K GPS HAT

GNSS module designed for Raspberry Pi Pico, based on the L76K chip, supporting GPS, BeiDou (BDS), GLONASS, and QZSS systems, with A-GNSS functionality, providing fast positioning, high accuracy, and low power consumption. Waveshare Pico-GPS-L76K

7-inch IPS monitor with a 5-point capacitive touch panel, 1024x600 resolution and HDMI input, designed for use with Raspberry Pi and other SBC platforms. Elecrow DLH05170B

Base shield for Raspberry Pi that enables connection of Crowtail modules via exposed GPIO, I2C, and UART interfaces, intended for expanding Raspberry Pi–based projects. Elecrow PSMC18002C

A robust enclosure designed for Raspberry Pi 5 and 5-inch touch displays, providing stable mounting, mechanical protection, and full access to essential interfaces. Compatible with multiple 5″ screens and supports installation of Raspberry Pi HATs. Waveshare PI5-CASE-TD2-5inch

5-inch DSI display with 720 × 1280 px resolution featuring an IPS panel and 5-point capacitive touch, manufactured using optical bonding technology with a toughened glass surface. Version with a black protective enclosure designed exclusively for Raspberry Pi 5, enabling clean and mechanically secured installation. Waveshare 5-DSI-TOUCH-B-WITH-CASE

RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and integrated LC76G GPS module. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, and includes a ceramic GNSS antenna in the set, enabling the development of portable HMI devices and embedded systems with positioning functionality. Waveshare RP2350-Touch-AMOLED-1.75-G

RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The version with protective enclosure is designed for portable devices, HMI panels, and interactive embedded systems requiring high-quality image output and touch support. Waveshare RP2350-Touch-AMOLED-1.75-B

RP2350 1.75" 466×466 with 65K color AMOLED display and capacitive touch panel, equipped with the RP2350A dual-core, dual-architecture microcontroller, 6-axis IMU sensor, RTC, audio codec with microphone, and power management system supporting a 3.7 V Li-Ion battery. The board provides SPI, I2C, UART, ADC, PWM, and USB Type-C interfaces, enabling the development of portable devices, HMI panels, and interactive embedded systems requiring high-quality display output and touch support. Waveshare RP2350-Touch-AMOLED-1.75