QTRX-HD-02A - module with 2 reflectance sensor with analog output
ID: 572387
5906623478880
zł21.09
Tax included
zł17.15 tax excl.
Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4402
Description
Reflectance sensor consisting of array 2 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 5 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 30 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:2
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 5 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 30 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 10,2 × 20,0 × 3,0 mm
- Weight: 0,6 g
572387
Data sheet
- Type of sensor
- QTRX
- Output type
- analog
- Number of sensors
- 2
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual motor controller that allows you to control two DC motors with 2.7-10.8V voltage and 1.2A continuous current per channel. Pololu 2130
zł38.90
24h
Available quantity: 3
Available
Kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. Pololu 3500
zł162.70
24h
Available quantity: 1
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.30
24h
Available quantity: 2545
Available
Other products in the same category (16)
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
zł38.18
24h
Available quantity: 1
Available
Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł2.16
4 weeks
No product available!
Infrared sensor module with TCRT5000 chip. It can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł3.84
24h
Available quantity: 17
Available
Module with five TCRT5000 reflective sensors. Powered with 5 V, it has analog outputs. It can detect objects at a distance of up to 15 mm
zł8.43
4 weeks
No product available!
Module with a reflection sensor operating in the infrared band. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020174
zł26.73
24h
Available quantity: 4
Available
Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4147
zł37.55
24h
Available quantity: 2
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4213
zł68.23
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4253
zł71.07
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153
zł69.24
24h
Available quantity: 3
Available
Module with 25 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4225
zł135.31
24h
Available quantity: 1
Available
Module with 25 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4125
zł135.31
24h
Available quantity: 2
Available
Module with 1 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4301
zł16.26
24h
Available quantity: 6
Available
Module with 1 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4341
zł15.02
24h
Available quantity: 4
Available
Module with 7 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4447
zł71.91
24h
Available quantity: 2
Available
Module with 7 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4347
zł64.92
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4413
zł116.87
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4402