QTRX-HD-15A - module with 15 reflectance sensor with analog output
ID: 572462
5906623478996
zł136.46
Tax included
zł110.94 tax excl.
Module with 15 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4415
Description
Reflectance sensor consisting of array 15 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 34 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 50 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:15
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 34 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 50 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 61,0 × 20,0 × 3,0 mm
- Weight: 3,5 g
572462
Data sheet
- Type of sensor
- QTRX
- Output type
- analog
- Number of sensors
- 15
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8835 Dual Motor Driver Carrier
zł23.90
Delivery date unknown
No product available!
Chassis Romi Chassis Kit is the ideal base for building a small mobile robot. The set contains all the necessary mechanical elements for building a mobile circular robot. Self-assembly set. Polol 3509
zł170.97
Delivery date unknown
No product available!
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
zł57.70
24h
Available quantity: 11
Available
Other products in the same category (16)
Available
Module with 8 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4448
zł78.97
24h
Available quantity: 1
Available
Module with 16 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4356
zł142.59
24h
Available quantity: 1
Available
A precision reflective sensor utilizing an IR diode and a phototransistor to measure light reflected from a surface. It offers an analog voltage output proportional to the reflected light and an optimal measurement range of 10 mm. Its low power consumption and compact size make it ideal for line-follower robots, edge detection systems, and educational projects. Pololu 4440
zł16.40
6 weeks
No product available!
QTR-3A Reflectance Sensor Array
zł32.62
24h
Available quantity: 1
Available
Module with a reflection sensor (line sensor) RS-06WD. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020172
zł22.18
24h
Available quantity: 2
Available
Module with 3 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4103
zł18.62
24h
Available quantity: 1
Available
Module with 4 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4304
zł35.83
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353
zł120.76
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4302
zł20.95
24h
Available quantity: 3
Available
Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122
zł109.10
4 weeks
No product available!
Module with 11 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4311
zł136.89
24h
Available quantity: 1
Available
Module with 9 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4109
zł47.98
24h
Available quantity: 1
Available
A reflective sensor that precisely measures the intensity of light reflected from a surface using an IR LED and a phototransistor. It offers a long detection range—optimally around 20 mm, and up to 80 mm—thanks to the QTRXL sensor with a built-in lens and adjustable LED brightness. It generates a digital RC signal that\'s easily read by microcontrollers like Arduino or Raspberry Pi. Pololu 4540
zł16.36
6 weeks
No product available!
No product available!
Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4107
zł37.23
24h
Available quantity: 1
Available
Module with 15 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4415