QTRX-MD-08RC - module with 8 reflectance sensor with RC (digital) output
ID: 572463
5906623479009
zł68.40
Tax included
zł55.61 tax excl.
Module with 8 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4348
Description
Reflectance sensor consisting of array 8 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are medium density (MD) and the distance between them is 8 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 17 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 40 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:8
- Sensor pitch: 8 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 17 mA
- Output signal: digital I/O-compatible signals that can be read in parallel as timed high pulses
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 40 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 61,0 × 20,0 × 3,0 mm
- Weight: 3,1 g
572463
Data sheet
- Type of sensor
- QTRX
- Output type
- digital
- Number of sensors
- 8
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 227
Available
Chassis Romi Chassis Kit is the ideal base for building a small mobile robot. The set contains all the necessary mechanical elements for building a mobile circular robot. Self-assembly set. Polol 3504
zł170.97
24h
Available quantity: 1
Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90
24h
Available quantity: 334
Available
Other products in the same category (16)
Module with 25 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4325
zł227.50
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4453
zł120.76
24h
Available quantity: 1
Available
Module with five reflection sensors. It has digital and analogue outputs. Thanks to the embedded EEPROM memory, it enables easy sensor calibration. Cytron Maker Line
zł44.12
24h
Available quantity: 2
Available
Module with an analog IR reflective sensor. It consists of an IR diode and a phototransistor which measures the intensity of the reflected light. Used, among others in line tracking robots. Cytron MAKER-REFLECT
zł8.68
24h
Available quantity: 10
Available
Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122
zł109.10
4 weeks
No product available!
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
zł38.18
24h
Available quantity: 1
Available
Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł2.16
24h
Available quantity: 3
Available
Infrared sensor module with TCRT5000 chip. It can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł3.84
24h
Available quantity: 19
Available
Module with five TCRT5000 reflective sensors. Powered with 5 V, it has analog outputs. It can detect objects at a distance of up to 15 mm
zł8.43
24h
Available quantity: 1
Available
Module with a reflection sensor operating in the infrared band. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020174
zł26.73
24h
Available quantity: 4
Available
Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4147
zł37.55
24h
Available quantity: 2
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4213
zł68.23
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4253
zł71.07
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153
zł69.24
24h
Available quantity: 3
Available
Module with 25 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4225
zł135.31
24h
Available quantity: 1
Available
Module with 25 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4125
zł135.31
24h
Available quantity: 2
Available
Module with 8 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4348