New products
New products New products
zł259.00
Delivery date unknown
Available
zł50.18
24h
Available
QTRX-HD-05RC - module with 5 reflectance sensor with RC (digital) output
ID: 572734
5906623479238
zł48.31
Tax included
zł39.28 tax excl.
Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4305
Description
Reflectance sensor consisting of array 5 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 14 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 40 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:5
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 14 mA
- Output signal: digital I/O-compatible signals that can be read in parallel as timed high pulses
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 40 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 21,0 × 20,0 × 3,0 mm
- Weight: 1,2 g
572734
Data sheet
- Type of sensor
- QTRX
- Output type
- digital
- Number of sensors
- 5
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
4WD car chassis construction kit. It can be used as a base for building a robot
zł30.93
Delivery date unknown
No product available!
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
zł57.70
Delivery date unknown
No product available!
Dual DC motor controller with voltage from 2.5 to 9.5V with 1A continuous current per channel. Has an embedded voltage regulator. Cytron Maker Drive
zł17.84
24h
Available quantity: 6
Available
Other products in the same category (16)
Module with five ITR20001/T reflective sensors. Powered with the voltage from 3.3 V to 5 V, it has analog outputs. It can detect objects at a distance of up to 5 mm. Waveshare Tracker Sensor
zł18.33
24h
Available quantity: 3
Available
QTR-1A Reflectance Sensor (2-Pack)
zł25.07
4 weeks
No product available!
Module with 4 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4244
zł23.51
24h
Available quantity: 1
Available
Module with 1 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4201
zł12.92
24h
Available quantity: 3
Available
Module with 11 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4211
zł61.75
24h
Available quantity: 1
Available
Module with 3 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4343
zł30.16
24h
Available quantity: 1
Available
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443
zł31.01
24h
Available quantity: 1
Available
QTRXL-MD-01A-S reflective sensor, 1-channel, analog output, side connector, long range – Pololu 4640
The QTRXL-MD-01A-S reflective sensor with an analog output enables precise detection of lines and objects. Thanks to its extended range and high sensitivity, it is used in robotic and automation projects. The JST SH connector allows easy integration, and the wide supply voltage range enables flexible use in 3.3 V and 5 V systems.
zł16.53
6 weeks
No product available!
Module with 11 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4111
zł61.75
24h
Available quantity: 2
Available
Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4442
zł19.90
4 weeks
No product available!
Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4147
zł37.55
24h
Available quantity: 2
Available
Module with 31 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4231
zł158.93
24h
Available quantity: 1
Available
Module with 1 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4341
zł15.02
24h
Available quantity: 4
Available
Module with 5 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4105
zł30.36
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4413
zł116.87
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4342
zł22.34
24h
Available quantity: 1
Available
Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4305