- Out-of-Stock
Luckfox Pico Mini A dev board with Rockchip RV1103, no connectors - Waveshare 25721
ID: 1188316
5906623424016
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Mini A
Description
LuckFox Mini is a development board that offers advanced programming and experimentation capabilities in the field of smart device applications, industrial automation, robots and drones. It is based on the Rockchip RV1103 system, which includes a powerful Cortex-A7 core clocked at 1.2 GHz and an additional RISC-V core and 64 MB of DDR2 memory. This allows for efficient data processing and running various applications. In addition, LuckFox is equipped with a neural network processing unit (NPU) with a performance of 0.5 TOPS, which enables acceleration of machine learning and artificial intelligence operations. NPU supports various data formats such as int4, int8 and int16. It also has an ISP (Image Signal Processor) input that allows image processing with a resolution of up to 4 megapixels at 30 frames per second, which is useful in image analysis projects.
| 1. USB type C | 5. Empty |
| 2. ACT-LED | 6. CSI |
| 3. USER-LED | 7. MicroSD socket |
| 4. BOOT button | 8. RV1103 |
The board has a USB 2.0 port in both host and device mode, which allows you to connect various peripherals and communicate with other devices. It is equipped with a MIPI CSI port allowing you to connect a camera and acquire image. In addition, it offers 17 general-purpose inputs/outputs (GPIOs), which gives the user great flexibility in the configuration and development of projects. Data storage is facilitated by a microSD card slot.
The LuckFox development board is a powerful tool for designing, testing and experimenting in fields related to programming, artificial intelligence, image analysis and communication. Its advanced capabilities make it ideal for a variety of applications, both educational and professional. Full documentation is available on the product page.
Features
- Rockchip RV1103G1 with Cortex-A7 core 1.2 GHz + RISC-V
- NPU: 0.5 TOPS, supports int4, int8 and int16
- ISP input 4M at 30fps (max)
- Memory: 64MB DDR2
- USB Host/Device USB 2.0
- MIPI CSI 2-lane camera
- 17 x GPIOs
- microSD card slot
- Dimensions: 28.14 x 21 mm
1188316
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB type A and USB type C plugs, length 2m, white
zł7.06
Delivery date unknown
No product available!
The camera is equipped with an SC3336 sensor with a resolution of 3 megapixels (2304 x 1296 pixels). It is compatible with the Luckfox Pico module, which allows it to be easily integrated into various projects and applications. Waveshare SC3336 3MP Camera (B)
zł36.40
Delivery date unknown
No product available!
Other products in the same category (16)
The two-channel DDS signal generator with a frequency of 60MHz enables the generation of various waveforms, from a sine wave with a range of up to 60MHz to a pulse wave with a range of up to 6MHz. The device is distinguished by a precise frequency resolution of 0.01uHz, stability of 1ppm/3h and 12-bit waveform resolution. Junctek JDS6600-60
Retired
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
Retired
No product available!
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. NanoV2 3.2"
Retired
No product available!
SDR (Software Defined Radio) receiver that allows you to receive signals in the frequency range from 10 kHz to 1 GHz. It is ideal for both monitoring low frequencies and receiving signals on higher bands
Retired
No product available!
Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.
Retired
No product available!
Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18083
Retired
No product available!
Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316
Retired
No product available!
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
Retired
No product available!
MP3 player module controlled by I2C interface or switching inputs. It is based on a 1.4 W audio amplifier. The board has a 3.5 mm audio output and a connector for connecting a loudspeaker. Files are played from a microSD card. SparkFun DEV-19030
Retired
No product available!
A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813
Retired
No product available!
Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-22000
Retired
No product available!
Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18082
Retired
No product available!
Sensor module for electromyography (EMG). Allows muscle activity to be studied and used to control devices. SparkFun DEV-21265
Retired
No product available!
Portable soldering iron with a power of 65 W. It has an adjustable operating temperature in the range of 50 ° C to 400 ° C. It can be powered via a DC or USB type C connector. The set includes a soldering iron and a BC2 tip. MiniWare TS101 (BC2) Blue
Retired
No product available!
Flexible 25 cm microSD to SD adapter. Supports all card capacities and types including: 16GB, 32GB, 64GB, 128GB Micro SD/SDHC
Retired
No product available!
DAC converter with built-in headphone amplifier. It is powered by DC 5V/1A and can work with various power sources, ensuring operational stability and excellent sound quality. DAC-Q3 Pro
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Mini A