.png)
- Out-of-Stock
ZL32ARM
ID: 137779
Evaluation board with LPC1114 microcontroller and built-in ISP programmer
Evaluation board with LPC1114 microcontroller and built-in ISP programmer
ZL32ARM board with LPC1114 microcontroller (Cotrex-M0 core) and built-in ISP programmer is all you need to start developing modern microcontroller devices.
Basic features:
- LPC1114FBD48/301 microcontroller with Cortex-M0 core, 32kB Flash, 8kB RAM, LQFP48 package
- 12MHz resonator
- Built-in USB programmer for LPC1000 microcontrollers
- Porgrammer can be broken off and used as standalone device
- Two LEDs
- 5-position joystick
- Analog potentiometer connected to microcontroller's ADC
- Reset button
- I2C and SPI Kamami standard connectors
- Microcontroller I/O lines available on pin headers
- Supplied from USB
137779
You might also like
Cable with USB plugs type A and mini-USB type B, cable with a length of 1.8 m
zł9.91
24h
Available quantity: 11
Available
Available
Available
Available
Available
Module with digital thermal sensor, thermostat and I2C interface
zł19.90
24h
Available quantity: 189
Available
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90
Delivery date unknown
No product available!
A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30
zł9.90
24h
Available quantity: 170
Available
Available
Available
Available
Available
Available
Available
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
zł3.96
24h
Available quantity: 13
Available
Other products in the same category (16)
Dispensing needle for precise application of glue, flux with an internal diameter of 1.37mm and an external diameter of 1.8mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.84mm and an external diameter of 1.25mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.6mm and an external diameter of 0.89mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
Retired
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
Retired
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
Retired
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
Retired
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
Retired
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
Retired
No product available!
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
Retired
No product available!
Evaluation board with LPC1114 microcontroller and built-in ISP programmer