- Out-of-Stock
AVT1498 B - very small power amplifier - set for self-assembly
ID: 190602
VERY SMALL POWER AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION
Description
VERY SMALL POWER AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION
SA58670 - a complete, integrated class D amplifier was used in the following project. The manufacturer packed it into a HVQFN20 housing with dimensions 4x4mm. The undoubted advantages of the amplifier are small dimensions and high efficiency. Thanks to this, it can be easily used in portable and battery-powered devices.
By default, the system has two balanced inputs. For cooperation in a system with single inputs, it is enough to connect with the mass.
The device is particularly recommended as an element of portable, battery-operated sound systems: radios, players, etc.
properties
- Output power 2x2,1W (2 x 4 ohms)
- Work in class D
- Symmetrical or asymmetrical inputs
- Possible gain change: 2, 4, 8 or 16V / V
- Small dimensions of the finished tile
- Power - 2.5-5 V
- The dimensions of the tile 35 x 18 mm
- The set includes a printed circuit board, a set of elements and documentation
- A detailed description in EP 10/08
190602
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Buy the base and top of this case separately to mix-and-match your choice of colors. Recommended to protect the ODROID-XU4 board from accidental damage.
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba
Retired
No product available!
Pre-installed Android4.4 or latest version for ODROID-XU3 and XU4. Ready to run out of box 8Gbyte eMMC Version 5.0 interface from Toshiba. JEDEC/MMCA version 5.0:HS400 interface with 8bit DDR mode
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
VERY SMALL POWER AMPLIFIER - A KIT FOR INDEPENDENT INSTALLATION