- Out-of-Stock
AVT929 / 2 A +
ID: 192892
4 FAN CONTROLLER (VERSION) - PLATE AND CONTINUOUS SYSTEM
4 FAN CONTROLLER (VERSION) - PLATE AND CONTINUOUS SYSTEM
Producer: AVT
Despite the continuous application of power for the lowest possible power consumption, many electronic systems require forced cooling. The fans used for this work Often in turn on / off mode, which causes excessive energy consumption and excessive noise.
The layout is an intelligent controller for four fan? W. Communication with the user is possible via the LED display or the alphanumeric LCD display. The controller has very simple designs, this was achieved using a PSoC microcontroller. It controls the speed? revolutions? each with a fan - depending on the measured temperature. Is tested also? operation of each drive engine. This makes it possible to detect the rotor seizure. Exceeding the permissible temperature is signaled acoustically.
The device is particularly useful everywhere where it is necessary to use forced cooling; in computers, power supplies, etc.
Selected parameters:
- simultaneous service of four fans?
- sound signaling of exceeding the permissible temperature threshold
- Attachment of the fan after exceeding the set temperature threshold
- motor drive seizure indication
- displaying the result in LED or LCD displays
- I2C interface for communication with the parent system
- power supply - 12 Vdc
- in the set printed circuit boards, programmed layout and documentation
A version with a set of elements is available for self-assembly
A precise description in EP 5/06
Download
192892
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
EEPROM CAT93C86LI-G memory; 16kbit; 2K x 8bit; access time: 150ns; Power supply: 1.8 ... 5.5 V; 8-Pin PDIP
Retired
No product available!
Nettemp Pi Hat is a module that allows to connect eight trees of sensors with I2C/1-Wire interface and control of four relays outputs. Thanks to the extension board is possible to build in an easy way e.g. a multipunkt temperature controller.
Retired
No product available!
32GB microSDHC Memory Card with SD Adapter, class 10 A1, Kingston
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 5 leads are available with 2 mm pitch with the possibility of soldering of gold pins, power lines, reset line and UART interface have been led to the connector. 3.3V power supply
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 8 pins with 2.54 mm pitch are available with soldered gold pins, 3 GPIO lines, reset, power supply and UART interface on the connector. U.FL. Antenna Connector 3.3 V power supply
Retired
No product available!
nRF51 DK is a development board based on the nRF51422 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, buttons and diodes available to the user.
Retired
No product available!
No product available!
4 FAN CONTROLLER (VERSION) - PLATE AND CONTINUOUS SYSTEM