- Out-of-Stock
These five-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
| Pins | A (mm) | B (mm) |
|---|---|---|
| 1×1 | – | 2.54 |
| 1×2 | 2.54 | 5.08 |
| 1×3 | 5.08 | 7.62 |
| 1×4 | 7.62 | 10.16 |
| 1×5 | 10.16 | 12.70 |
| 1×6 | 12.70 | 15.24 |
| 1×7 | 15.24 | 17.78 |
| 1×8 | 17.78 | 20.32 |
| 1×9 | 20.32 | 22.86 |
| 1×10 | 22.86 | 25.40 |
| 1×12 | 27.94 | 30.48 |
| 1×16 | 38.10 | 40.64 |
| 2×2 | 2.54 | 5.08 |
| 2×3 | 5.08 | 7.62 |
| 2×4 | 7.62 | 10.16 |
| 2×5 | 10.16 | 12.70 |
| 2×6 | 12.70 | 15.24 |
| 2×7 | 15.24 | 17.78 |
| 2×8 | 17.78 | 20.32 |
| 2×10 | 22.86 | 25.40 |
| 2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
AVT kit for self-assembly of a remotely controlled switch with two relays. AVT5551 B
No product available!
Assembled, remote controlled switch with two relays. AVT5551 C
No product available!
PCB with programmed circuit for assembly of the operating time counter triggered by the current flow. AVT5548 A +
No product available!
AVT kit for self-assembly of a work time counter triggered by current flow. AVT5548 B
No product available!
PCB board for power amplifier module with LM3886. AVT1922 A
No product available!
AVT kit for self-assembly of power amplifier with LM3886. AVT1922 B
No product available!
Assembled power amplifier from LM3886. AVT1922 C
No product available!
PCB and programmed program of the "Tajmerek" programmable time module. AVT5560 A
No product available!
AVT kit for self-assembly of the programmable timer module "Tajmerek". AVT5560 B
No product available!
Assembled programmable time module "Tajmerek". AVT5560 C
No product available!
PCB for energy-saving optical siren with LED diodes. AVT790 A
No product available!
AVT kit for self-assembly of energy-saving optical siren with LED diodes. AVT790 B
No product available!
Arducam 0.3 Megapixels OV7670 640x480 CMOS Sensor Camera Module SCCB Compatiable for I2C. ArduCAM B0023
No product available!
Camera module 0.3 Mpx with the Aptina Imaging MT9V111 CMOS sensor with a matrix resolution of 640 x 480 pixels and transmission speeds in the VGA format up to 30 FPS. Adapted to work in low light conditions. Communication via a parallel interface. ArduCAM B0059
No product available!
2 Mpx camera module with OV2640 sensor with a matrix resolution of 1600 x 1200 pixels and transmission speeds up to 60 FSP. Communication via the SCCB interface. It has an M12 lens mount and the attached lens HX-27227. ArduCAM U3359
No product available!
2 Mpx camera module with OV2640 sensor with a matrix resolution of 1600 x 1200 px and transmission speeds up to 60 FSP. Communication via the SCCB interface. Possible JPEG compression in real time. ArduCAM B0011
No product available!