- Out-of-Stock
A small motor with a plastic gear 180:1 and a output shaft with a diameter of 3 mm in the shape of the "D". The recommended operating voltage of the motor is 4.5 V and at this voltage it reaches a speed of 80 RPM and a maximum torque of 2.2 kg*cm, consuming a current from 0.08 A to 0.8 A.
Our offer includes wheels suitable for motors with a shaft with a diameter of 3 mm and the shape of the letter "D". There are wheels of various diameters from 32 mm to 90 mm in many colors.


Suitable mounting brackets in low and high versions are available for the motors.

Also available are encoder kits for mounting on the motor shaft for use with holders.

Our offer includes a number of controllers that perfectly cooperate with the presented engines.
![]() |
![]() |
![]() |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pololu Low-Voltage Dual Serial Motor Controller
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
DRV8835 Dual Motor Driver Carrier
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the Pololu dual-shaft mini plastic gearmotors. Pololu 1523
No product available!
Antenna splitter that allows one GNSS antenna to be connected to two devices, such as the NEO-D9S correction data receiver and another GNSS module. The module, based on the BP2G1+ from Mini-Circuits, evenly splits the signal from the antenna port between two outputs, providing power to the active antenna and optionally switchable power supply. SparkFun SPX-21223
No product available!
LAMP AND ALTERNATOR REFRIGERATION SIGNAL. LED FLASHER. TIME LIGHT - A KIT FOR SELF-ASSEMBLY
No product available!
No product available!
No product available!
A highly cost-effective audio hat which fits on the GPIO of the Raspberry Pi B+/2B/3B, uses i2S interface audio solution, supports 24-bit /192KHz high quality sound, compatible with other audio equipment via RCA lotus socket, includes a built-in high fidelity headphone amplifier, where you can plug in a 3.5mm audio jack directly. DFR0449
No product available!
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 8 mm and a height of 4 mm.
No product available!
No product available!
The STM32 Nucleo-144 boards provide an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller
No product available!
Assembled symmetrical power supply for audio amplifiers. AVT3233 C
No product available!
No product available!
No product available!
GPS module with u-blox ZED-F9R. Uses Automotive Dead Reckoning (ADR). Provides an exact position by combining 3D IMU, vehicle dynamics model, correction data and GNSS. SparkFun GPS-18719
No product available!
No product available!
A small motor with a plastic gear 180:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1594