- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Pololu 2141 - Power HD High-Speed Digital Sub-Micro Servo DSP33
ID: 195799
Power HD High-Speed Digital Sub-Micro Servo DSP33
Power HD High-Speed Digital Sub-Micro Servo DSP33
The DSP33 from Power HD is a very fast sub-micro servo with digital control electronics for increased performance. At just 3 g, it is one of the smallest and lightest servos we carry, making it a great tiny actuator for robotic or RC mechanisms that need to be quick and very light. This servo features a light, 3"-long cable terminated by a special 1.5mm-pitch ZH-style JST connector intended for very small RC receivers. Servo horns and associated hardware are included.
Key specs at 6 V: 0.07 sec/60°, 5 oz-in (0.35 kg-cm), 3 g.
The tiny DSP33 from Power HD is a high-speed sub-micro servo with digital control electronics for increased performance. Weighing in at under 3 g, it is one of the smallest and lightest sub-micro servos we carry, making it a great actuator for small robot mechanisms or weight-sensitive applications. This servo features a light, 3"-long cable terminated by a special ZH-style JST connector with a 1.5mm pitch. This connector is intended for very light receivers like the Spektrum AR6300 and is also sometimes referred to as a micro JST or miniJST connector.
Note: This servo’s connector will not work directly with standard 0.1" servo receptacles. Also, this type of connector has ground as the middle pin, which differs from standard servo cables. The signal pin is the gray wire.
Servo horns and associated hardware are included, though the hardware might vary from what is shown in the picture below.
|
|
The servo’s gears are plastic for reduced weight. Note that, as with most hobby servos, stalling or back-driving this servo can strip its gears.
People often buy this product together with:
 |
Micro Maestro 6-Channel USB Servo Controller (Assembled) |
 |
Sub-Micro Servo 3.7g (Generic) |
 |
Power HD High-Speed Digital Micro Servo DSM44 |
195799
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
An advanced 3D printer that offers unique multi-color printing capabilities thanks to the Automatic Material System (AMS). It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon Combo
Retired
No product available!
The PMP-16A power relay ensures reliability, versatility and high operational safety, making it ideal for a variety of industrial and home applications. Finder 62.33.9.024.0040
Retired
No product available!
The 66.82 power relay with two changeover contacts with a load capacity of 30A, Faston 250 connections and safe circuit separation ensures high performance and compliance with safety standards. Finder 66.82.9.024.0000
Retired
No product available!
The PMP-16A-F250 power relay offers reliability, versatility and safety in high-power applications, thanks to mounting with a Faston 250 connector and numerous additional equipment options. Finder 62.83.8.230.0300
Retired
No product available!
Shielded WiFi 802.11b/g/n and Bluetooth 5.1 communication module by Murata based on the Infineon CYW43439 chipset, featuring SDIO, UART, and PCM interfaces for IoT devices and industrial applications. Murata LBEE5KL1YN-814
Retired
No product available!
The 74LVC125ABQ is a four-channel, 3-state output buffer/line driver supporting voltages up to 5 V. Ideal for interfacing with 5 V logic, it features low power consumption and direct interfacing with TTL levels.
Retired
No product available!
CYBERSOLV 141-X is an efficient and reliable solvent-based cleaning agent, ideal for manual cleaning of electronic circuits, connectors, and cables. Its low surface tension and quick evaporation make it perfect for precisely removing flux residues from hard-to-reach areas on PCBs. CYBERSOLV 141-X
Retired
No product available!
Bambu Lab PLA Basic is a versatile PLA filament, ideal for fast and precise 3D printing, ensuring excellent print quality. Bambu Lab PLA Purple
Retired
No product available!
The Smooth PEI plate allows for printing with a flat, matte finish, the set includes various hotends and mounting accessories from A1 mini, devices in quality and rotational speeds. Bambu Lab Smooth PEI Plate and Hotends Combo - A1 mini
Retired
No product available!
Filament Fiberlogy Easy PLA in brick color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Brick
Retired
No product available!
Filament Fiberlogy Easy PLA in cyan color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Cyan
Retired
No product available!
Filament Fiberlogy Easy PLA in magenta color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Magenta
Retired
No product available!
Filament Fiberlogy Easy PLA in neon orange color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Neon Orange
Retired
No product available!
Filament Fiberlogy Easy PLA in neon yellow color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Neon Yellow
Retired
No product available!
Filament Fiberlogy Easy PLA in Sandstone color with a diameter of 1.75 mm. 0.85 kg of filament is wound on the spool. Fiberlogy Easy PLA Sandstone
Retired
No product available!
An advanced 3D printer that offers unique printing capabilities. It supports a wide range of filaments, including PLA, PETG, TPU, ABS, as well as carbon fiber-reinforced polymers, ensuring a maximum hot end temperature of up to 300°C and a print speed of up to 500 mm/s. The device is equipped with advanced features such as Bambu Micro Lidar, a chamber monitoring camera and power loss recovery, making it an ideal solution for demanding industrial and hobby projects. Bambu Lab X1-Carbon 3D Printer
Retired
No product available!
Power HD High-Speed Digital Sub-Micro Servo DSP33