Paint thickness gauge GL-1 Fe

Paint thickness gauge GL-1 Fe

The thickness gauge GL-1 Fe is used to measure the thickness of the lacquer layer applied to a steel or galvanized steel plate. The measurement is shown on the LCD display 2 lines of 8 characters. The measurement resolution is 1 meter and the measuring range from 0 to 1100. The meter has a zeroing function (calibration) - the zeroing plate is included. The built-in memory of 100 measurements allows you to freely view the measurements after the measurements. The memory is not deleted when the device is turned off or the battery is removed. The device has a built-in display backlight, thanks to which it is easier to take measurements in darker rooms (eg in the garage). The meter is operated from the five-function main MENU: MEASUREMENT, MEMORY, EXCEPTION, MEMORY CLEARING, ZERO. The meter's operation is very intuitive.
Basic features of the device:
- measurement on steel and galvanized steel sheets;
- measurement resolution: 1 μm;
- measuring range (paint thickness): 0μm to 1100μm;
- possibility of zeroing the device (calibration) - the zeroing (calibration) plate is included;
- a permanent memory of 100 measurements;
- LCD backlight;
- intuitive operation via the 5-position MENU;
- automatic shutdown of the meter after 3 minutes of inactivity;
- power supply: 9V alkaline battery (eg 6LR61) or 9V battery;
- polycarbonate keyboard based on microswitches;
- diameter of the measuring probe: 15mm;
- power consumption: <40mA;