- Out-of-Stock
AVT964 A
ID: 192624
INPUT TREATMENT TO THE FREQUENCY METER - PLATE
INPUT TREATMENT TO THE FREQUENCY METER - PLATE
Producer: AVT
An important element of each frequency meter is the entrance track. It is important that it is sensitive enough and works to the frequency required by the user. These features have a set presented. It has two measuring sub-ranges. RF path works to 1.1 GHz frequency. The system has a built-in prescaler. Sensitivity of the measuring system is smoothly controlled by a potentiometer.
The device is especially recommended for users of self-made frequencies, also for those who want to modify the factory production equipment
Selected parameters:
- two measuring sub-ranges
- common entrance for the MW and RF ranges (switching paths with logic level)
- sensitivity around 20mV
- working frequency: m.cz. - 5 Hz - 75 MHz; HF path - 70 MHz - 1.1 GHz
- input resistance of the track 1 Mom
- maximum amplitude of the MW signal 6 V (the limiter works above)
- built-in divider by 1024 (switched on by logic level)
- power supply - 15 Vdc
- printed circuit board and documentation included
Detailed description in EP 1/07
Download
192624
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
RoboClaw 2x45A Motor Controller (V5D) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 45A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3287
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC or analog inputs. This version can supply a continuous 15 A per channel (30 A peak) and operates up to 34 V.
Retired
No product available!
The RoboClaw motor controllers from Basicmicro (formerly Ion Motion Control) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. This version can supply a continuous 30 A per channel (60 A peak) and operates up to 34 V.
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L YELLOW
Retired
No product available!
Pin strip straight in yellow, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L YELLOW
Retired
No product available!
Pin strip straight in red, single-row, extended, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S L RED
Retired
No product available!
Adjustable USB load displaying voltage and current consumption of connected devices. The load can draw current up to 3 A. The voltage is measured in the range 3.5 ... 21V, current 0 ... 4A. It is also possible to measure cell capacity
Retired
No product available!
No product available!
Printed circuit board and programmed layout for building a comfortable direction indicator module. AVT1945 A +
Retired
No product available!
AVT kit for self-assembly of the comfortable direction indicator module. AVT1945 B
Retired
No product available!
Assembled module of comfortable direction indicators. AVT1945 C
Retired
No product available!
The camera V3 module is specifically designed for Banana Pi M3. Includes two CMOS sensor modules: OV5640 (5M Pixel) and OV8865(8M Pixel)
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB10S L BLUE
Retired
No product available!
Pin strip straight in blue, single-row, extended, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S L BLUE
Retired
No product available!
2x16 display with LED backlight (Yellow / Green). The height of the 9.66mm mark (BIG). ECO - low power consumption; only 30mA (including backlight), 2-LED backlight
Retired
No product available!
Orange Pi ABS Transparent Protective Case for Orange Pi Plus 2
Retired
No product available!
INPUT TREATMENT TO THE FREQUENCY METER - PLATE