- Out-of-Stock
UDOO-NEO EXTENDED
ID: 562440
UDOO-NEO EXTENDED is a single-board computer with a dual-core ARM processor (Cortex-A9 and Cortex-M4 in one system), 1 GB of RAM, Linux, Bluetooth 4.0, Wi-Fi, and IMU.
Description
UDOO NEO is a single board computer based on a dual-core ARM processor with two different cores in one system. They are 1 GHz ARM Cortex-A9 and 200 MHz ARM Cortex-M4. Both cores were closed in the i.MX 6SoloX processor system. This processor provides the ability to operate the computer under the control of operating systems from the Linux family (UDOObuntu 2.0 - Ubuntu 14.04 LTS or Android 6.0.1 MARSHMALLOW), as well as full compatibility with Arduino UNO. The EXTENDED version is equipped with 1 GB of RAM and an integrated 2D and 3D graphics controller. The computer will certainly find many applications in the construction of drones, mobile robots, 3D printers or even home automation systems.
properties
- Dual core Freescale i.MX 6SoloX processor with Cortex-A9 and Cortex-M4 cores
- 1 GB of RAM
- Integrated 2D and 3D graphics controller
- Outputs video image
- Micro HDMI
- LVDS + I2C interface (for touch panel)
- Video input
- Analog input supporting PAL and NTSC
- 8-bit parallel digital camera interface
- Memory
- MicroSD card slot
- 8-bit SDIO interface
- Audio
- HDMI
- S / PIDF & I2S
- USB
- 1x USB 2.0 A
- 2x USB OTG (micro-AB connector)
- Internet network
- Wi-Fi 802.11 b / g / n
- Bluetooth 4.0 Low Energy
- Serial ports
- 3x UART
- 2x CAN
- Other interfaces
- 8x PWM
- 3x I2C
- 1x SPI
- 6x multiplexable signals
- Computer power supply
- 5 V DC Micro USB
- 6 - 15 V DC Power Jack
- RTC clock battery connector
- LED diodes - green (power status) and red and green (configurable by the user)
- Built-in sensors
- 3-axis accelerometer
- 3-axis magnetometer
- 3-axis digital gyroscope
- 1x additional sensor connector (I2C interface)
- Dimensions: 89 mm x 59 mm (3.50 "x 2.32")
- GPIO connectors fully compatible with Arduino UNO and with all shields for Arduino
- 6 analog inputs
- 32 GPIO core A9
- 22 GPIO Arduino M4 core
- Operating Systems
- UDOObuntu 2.0 - Ubuntu 14.04 LTS
- Android 6.0.1 MARSHMALLOW
Comparison of the SBC UDOO version
Model | UDOO NEO BASIC | UDOO NEO EXTENDED | UDOO NEO FULL |
| CPU | Application processor Freescale ™ i.MX 6SoloX, combining two cores: ARM Cortex-A9 and Cortex-M4 | Application processor Freescale ™ i.MX 6SoloX, combining two cores: ARM Cortex-A9 and Cortex-M4 | Application processor Freescale ™ i.MX 6SoloX, combining two cores: ARM Cortex-A9 and Cortex-M4 |
| GPU | Integrated 2D / 3D graphic controller | Integrated 2D / 3D graphic controller | Integrated 2D / 3D graphic controller |
| Compatible with Arduino |  | | |
| 54 GPIO | | | |
| WIFI & Bluetooth |  | | |
| Ethernet | | | |
562440
You might also like
Raspberry Pi 3 model B (Quad Core Broadcom BCM2837, 4x1.2GHz ARM Cortex-A53, RAM 1GB, 4xUSB, Ethernet, HDMI, Wifi, Bluetooth)
zł179.00
Delivery date unknown
No product available!
Other products in the same category (16)
AVTRELDUINO SHIELD - EXECUTION MODULE FOR ARDUINO - A SYSTEM HOLDED AND LAUNCHED
Retired
No product available!
No product available!
Stabilized laboratory power supply Wanptek with variable voltage regulation in the range from 0 to 60V and current in the range of 0 to 5A. Wanptek KPS605D
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
USB tester for precise monitoring of the operation of devices connected to the USB port. It has built-in Bluetooth communication. Allows recognition of fast charging modes and monitoring and conversion of PD modes. Fnirsi C1
Retired
No product available!
Female terminal block, 5-pin. Pitch 3.81mm. Height 11.1mm. 15EDGK-3.81-5P
Retired
No product available!
No product available!
No product available!
Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405
Retired
No product available!
One-touch sensor module, illuminated with red diodes, with AT42QT1010, ERAmatic
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set with FPGA Terasic DE10-Nano board and Bluetooth and WiFi module. Designed for projects using FPGA to work in the cloud. TerasIC P0685
Retired
No product available!
No product available!
UDOO-NEO EXTENDED is a single-board computer with a dual-core ARM processor (Cortex-A9 and Cortex-M4 in one system), 1 GB of RAM, Linux, Bluetooth 4.0, Wi-Fi, and IMU.