- Out-of-Stock

264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
This is an E-Ink raw display, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Note: To fastly get started with these raw displays, please consider the universal driver board: e-Paper Driver HAT
Part Number | Colors | Grey Level | Resolution | Display size (mm) | Outline Dimension (mm) | Full Refresh Time (s) | Partial Refresh Time (s) | Interface |
---|---|---|---|---|---|---|---|---|
1.54inch e-Paper | black, white | 2 | 200x200 | 27.60 × 27.60 | 31.8 × 37.3 | 2 | 0.3 | SPI |
1.54inch e-Paper (B) | red, black, white | 2 | 200x200 | 27.60 × 27.60 | 31.8 × 37.3 | 8 | N/A | SPI |
1.54inch e-Paper (C) | yellow, black, white | 2 | 152x152 | 27.51 × 27.51 | 31.8 × 37.3 | 27 | N/A | SPI |
2.13inch e-Paper | black, white | 2 | 250x122 | 48.55 × 23.71 | 59.2 × 29.2 | 2 | 0.3 | SPI |
2.13inch e-Paper (B) | red, black, white | 2 | 212x104 | 48.55 × 23.71 | 59.2 × 29.2 | 15 | N/A | SPI |
2.13inch e-Paper (C) | yellow, black, white | 2 | 212x104 | 48.55 × 23.71 | 59.2 × 29.2 | 15 | N/A | SPI |
2.7inch e-Paper | black, white | 2 | 264x176 | 57.29 × 38.19 | 70.4 × 45.8 | 6 | N/A | SPI |
2.7inch e-Paper (B) | red, black, white | 2 | 264x176 | 57.29 × 38.19 | 70.4 × 45.8 | 15 | N/A | SPI |
2.9inch e-Paper | black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 2 | 0.3 | SPI |
2.9inch e-Paper (B) | red, black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 15 | N/A | SPI |
2.9inch e-Paper (C) | yellow, black, white | 2 | 296x128 | 66.89 × 29.05 | 79.0 × 36.7 | 15 | N/A | SPI |
4.2inch e-Paper | black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 4 | N/A | SPI |
4.2inch e-Paper (B) | red, black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 15 | N/A | SPI |
4.2inch e-Paper (C) | yellow, black, white | 2 | 400x300 | 84.80 × 63.60 | 90.1 × 77.0 | 15 | N/A | SPI |
7.5inch e-Paper | black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 6 | N/A | SPI |
7.5inch e-Paper (B) | red, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI |
7.5inch e-Paper (C) | yellow, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI |
Weight: 0.008 kg
Note: This is a raw display, you may also want to buy the assembled variant for easy testing and comparing: 2.7inch e-Paper HAT (B)
Data sheet
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
E-Ink display module with a resolution of 400x300 pixels and a diagonal of 4.2 inches. The display has a built-in controller, communication takes place via the SPI interface. Waveshare 4.2inch e-Paper Module
No product available!
No product available!
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
No product available!
No product available!
Assembled 2-channel MIN-MAX thermometer with alarm. AVT1999 C
No product available!
No product available!
Digilent ZYBO SoC platform powered by Xilinx Zynq Z-7010 with a dual-core ARM® Cortex-A9 processor and an Xilinx 7-series FPGA. 410-279
No product available!
Andrzej Chochowski
No product available!
No product available!
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 6 mm and a height of 1 mm.
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high quality ABS granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
No product available!
HAT designed for Raspberry Pi 3B+ and Raspberry Pi 4B minicomputers. HAT enables direct power supply of the minicomputer from the Ethernet port. The module is powered by 37 to 57 V, supplies 5V and 3A. ArduCam U6102
No product available!
No product available!
No product available!
No product available!
264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB