- Out-of-Stock
MI:pro - Case for micro:bit (clear)
ID: 569528
5906623438341
Simple and compact protective case for the micro:bit. Made of transparent acrylic. PRT - 14335
Overview
The MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability to wall-mount the whole assembly onto any surface you want while still providing access to all buttons and ports on the micro:bit. Though these cases do feature wall-mountable tabs, the biggest benefit of using a case is to not accidentally short out the pads on the back of the micro:bit.
Construction is simple, requiring only a small flathead screwdriver, and involves layering each plate on top of one another around the micro:bit and screwing it into place. Luckily, the MI:pro case enables easy access to the edge pins at the bottom of the micro:bit, allowing it to still be plugged into an edge connector found on many of our carrier boards. The only board that cannot be used in conjunction with the MI:pro case is the SparkFun gamer:bit due to its edge connector being located in the center of the board.
Note: The MI:pro case only includes the parts found below. This case does NOT include a micro:bit, power source or mounting screws. These items will need to be purchased separately.
Includes
- 1x Front Plate
- 1x Back Mounting Plate
- 2x Mid-layer Plate
- 4x M3 Nylon Machine Screw
- 4x M3 Nylon Full Nut
569528
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows to connect the micro:bit to breadboards and other sensors, motors, LEDs and more! BOB-13988
zł43.62
24h
Available quantity: 2
Available
Other products in the same category (16)
Printed circuit board and programmed system for the electromagnetic transom control. AVT1919 A +
Retired
No product available!
AVT kit for self-assembly of the electromagnetic lock controller. AVT1919 B
Retired
No product available!
Assembled electromagnetic lock controller. AVT1919 C
Retired
No product available!
Printed circuit board and programmed system for the alarm control panel cooperating with the motion sensor. AVT1925 A +
Retired
No product available!
AVT kit for self-assembly of the alarm control panel cooperating with the motion sensor. AVT1925 B
Retired
No product available!
Assembled alarm control panel cooperating with the motion sensor. AVT1925 C
Retired
No product available!
AVT kit for self-assembly of the power distributor. AVT1930 B
Retired
No product available!
Assembled power divider, designed to supply several receivers from one voltage source with more power. AVT1930 C
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool. XF-ABS-175-GRAY
Retired
No product available!
Flexible PVC cover for 6M3 connector, for ØD = 3.5mm cable, length L = 24mm, width W = 6.5mm, black, RoHS
24h
Available quantity: 20
No product available!
The AM receiver of the DCF77 signal with the MAS6180 system, allows to receive the frames of the synchronization signal from the time standard, using the carrier frequency of 77.5kHz. Thanks to this module, it is possible to create a clock with automatic date and time synchronization. The module has a ferrite antenna. modDCF77
Retired
No product available!
Module with Tegra X1 SoC system containing four 64-bit ARM Cortex A57 cores and a Maxwell graphic layout consisting of 256 cores supporting CUDA technology. NVIDIA Jetson TX1
Retired
No product available!
Arducam-F Rev.C+ Camera module shield with OV2640 for Arduino UNO MEGA2560 DUE. ArduCam B0051+B0011
Retired
No product available!
Arducam-LF Rev.C+ Camera module + 3.2 inch LCD for arduino UNO MEGA2560 DUE. ArduCam B0052+B0011
Retired
No product available!
Module designed for connecting more than one camera to a single CSI camera port on RPi board. One adapter board can connect 4 cameras and user can stack up max. 4 adapter boards that means up to 16 cameras on a single RPi board. ArduCAM B0069
Retired
No product available!
Simple and compact protective case for the micro:bit. Made of transparent acrylic. PRT - 14335