- Out-of-Stock
ZL4ST7 - development kit for ST7FLITE49 microcontrollers
ID: 57275
Development kit for ST7FLITE49 microcontrollers
Development kit for ST7FLITE49 microcontrollers
The ZL4ST7 set, thanks to the extensive set of typical peripheral systems, provides the environment for running prototypes of systems built using the ST7LITE49 microcontroller. It can also be used as an educational set while learning programming ST7 microcontrollers.
The basic properties of the set:
- ST7FLI49K2T6 microcontroller in the TQFP-32 enclosure (among others, 8 kB Flash memory, 384 B RAM memory, 256 B EEPROM memory, 6 timers, up to 24 I / O lines, I2C, SPI, 10-channel AC converter)
- 4-button keyboard
- 5-way joystick
- 8 LEDs
- four-digit seven-segment LED display
- connector for 2x16 alphanumeric LCD display (LCD1602)
- connector for 128x64 pixel graphic LCD with driver KS0108 (LCD12864)
- clock circuit M41T00 (STMicroelectronics) working on the I2C bus with the battery holder CR2032
- digital thermometer STCN75 (STMicroelectronics)
- analog thermometer STLM20 (STMicroelectronics)
- infrared receiver TSOP31236 (36kHz)
- piezoelectric transducer
- connector for the USBUART module (ZL1USB, ZL4USB)
- ICP programming connector
- USB connector designed to power the set from the computer's USB port.
- DB9 connector with ST232 voltage converter for RS232 transmission
- set of pin connectors with all useful signals of the microcontroller and peripheral systems
- potentiometer enabling the voltage from the range of 0 ... 5 V to be input to the input of an analog-digital converter built into the microcontroller
The set includes:
- development kit with ST7FLITE49K2T6 microcontroller
57275
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 308
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 357
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 117
Available
LCD character display 2x16, 1x16 pin header for evaluation boards
zł39.90
24h
Available quantity: 54
Available
Available
Available
Available
Available
Available
Available
Module with digital thermal sensor, thermostat and I2C interface
zł19.90
24h
Available quantity: 189
Available
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90
24h
Available quantity: 3
Available
A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30
zł9.90
24h
Available quantity: 192
Available
Available
Available
Available
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 20
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 9
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.68
24h
Available quantity: 410
Available
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
zł28.87
24h
Available quantity: 5
Available
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
zł10.46
24h
Available quantity: 17
Available
Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch
zł3.75
24h
Available quantity: 18
Available
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
zł31.22
24h
Available quantity: 7
Available
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
zł114.78
Delivery date unknown
No product available!
The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator
zł27.90
24h
Available quantity: 367
Available
Other products in the same category (16)
Board with WiFi module with ESP32 chip and OV2640 camera. The module is characterized by small size and low current in sleep mode. ESP-32CAM can be widely used in various IoT applications. ESP32-CAM
Retired
No product available!
Digital LED voltmeter 0,28 "with measuring range 0-100 V. Module powered with 3-30V voltage.
Retired
No product available!
Driver for saunas and heating systems, allowing the system to be turned on and off, and control the temperature via a WiFi network using the smartphone application without the use of additional peripherals. BleBox SaunaBox
Retired
No product available!
No product available!
FPF1048BUCX, Power Switch ICs - Power Distribution IntelliMAX Slew Rate Controlled Load Switch, WLCSP-6
Retired
No product available!
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31CU
Retired
No product available!
WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.
Retired
No product available!
5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera
Retired
No product available!
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8 GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Linux
Retired
No product available!
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Retired
No product available!
BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53
Retired
No product available!
Development kit for ST7FLITE49 microcontrollers