- Out-of-Stock
![7.5inch e-Paper HAT (C) - module with display 7.5" e-Paper 640x384 for Raspberry Pi 7.5inch e-Paper HAT (C) - module with display 7.5" e-Paper 640x384 for Raspberry Pi](https://kamami.pl/33186-large_default/75inch-e-paper-hat-c-module-with-display-75-e-paper-640x384-for-raspberry-pi.jpg)
Module with e-Paper display, diagonal 7.5" and resolution 640x384 px. Communication via SPI interface. Waveshare 7.5inch e-Paper HAT (C)
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with an e-Paper display with a diagonal of 7.5" and a resolution of 640x384 px. It has the ability to display content with a two-level gray scale in three colors: yellow, black and white. The built-in controller communicates via the SPI interface. contrast of the displayed image and take power only when the displayed content is changed The module has a built-in voltage level converter and is compatible with 3.3 V and 5 V systems. The set includes an hat that allows you to connect the display via a 40-pin connector. On the Wiki page is available support in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino, STM32.
Data sheet
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Module with e-Paper display, diagonal 7.5" and resolution 800×480px. Communication via SPI. Waveshare 7.5inch e-Paper HAT
RF remote transmitter with USB port - set for self-assembly
No product available!
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
No product available!
The LCD Button Shield V2 attaches to your Arduino to provide a 16x2, black character, green back light LCD with a keypad consisting of 5 keys — select, up, right, down and left. With this shield you will be able to move through menus and make selections straight from one board attached to your Arduino without requiring a massive tower of shields. DEV-13293
No product available!
No product available!
No product available!
No product available!
No product available!
Starter kit with Analog Discovery 2. Provides the ability to start communication with displays, digital logic circuits, motors, sensors and analog circuits. Digilent 240-124
No product available!
No product available!
No product available!
SEN-12636 - 9 Degrees of Freedom IMU Breakout - LSM9DS0
No product available!
No product available!
No product available!
No product available!
Module with e-Paper display, diagonal 7.5" and resolution 640x384 px. Communication via SPI interface. Waveshare 7.5inch e-Paper HAT (C)