- Out-of-Stock
1.54" (C) Tri-Color E-Ink e-Paper Display 152x152 - Waveshare 14267
ID: 573328
5906623422241
Module with 3-color (yellow, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. SPI interface. Waveshare 1.54inch e-Paper Module (C)
Description
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. It has the ability to display content with a two-level gray scale. The built-in controller communicates via the SPI interface. Displays of this type are characterized by high contrast of the displayed image and take power only when the displayed content is changed. The module has a built-in voltage level converter, which makes it compatible with 3.3 V and 5 V systems. On the product page, support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 1.54"
- Resolution: 152x152 px
- Display color: yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.181 × 0.181
- Full refresh time: 27 seconds
- Power consumption: 26.4 mW
- Viewing angle:> 170 °
- No backlight, displays the last content after power off
- Low energy consumption
- Built-in logic level converter, compatible with 3.3V/5V MCU
- Working voltage: 3.3V/5V
- Display size: 27.51 × 27.51 mm
- Outline dimensions: 31.8 × 37.32 × 1.05 mm
Kit contains
- 1.54inch e-Paper Module (C)
- PH2.0 20cm 8-pin cable
573328
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 1,54
- Resolution
- 152 x 152 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 97
Available
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł155.00
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł79.64
24h
Available quantity: 13
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 70
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 125
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,189.00
24h
Available quantity: 10
Available
Other products in the same category (16)
Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B
Retired
No product available!
Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B
Retired
No product available!
Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B
Retired
No product available!
A set for building a fighting robot controlled by a mobile application for a smartphone or tablet. Totem TRK-MT1G
Retired
No product available!
A set for the construction of two fighting robots (green and yellow) controlled by a mobile application for a smartphone or tablet. Totem TRK-MT2
Retired
No product available!
A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem
Retired
No product available!
A set for building a mobile robot with a gripper controlled by a mobile application. TMK-DMNNG totem
Retired
No product available!
Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG
Retired
No product available!
Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF
Retired
No product available!
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
Retired
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Development kit with RP2040 microcontroller equipped with two ARM Cortex-M0 + cores that work at 133 MHz, 264 kB RAM. The board has a QVGA camera, LCD display, IMU system and a microphone. ArduCAM B0302
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Retired
No product available!
Module with 3-color (yellow, black, white) e-Paper display with a diagonal of 1.54" and a resolution of 152x152 px. SPI interface. Waveshare 1.54inch e-Paper Module (C)