- Out-of-Stock
Akyga Li-Po battery 3.7V / 700mAh connector
ID: 574186
5906623413324
Li-Po battery 3.7V / 700mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP503442
Description
Li-Po battery with a nominal voltage of 3.7 V and a capacity of 700 mAh. It is equipped with a PCM protection that protects the cells against overcharging, over-discharge and short-circuit, and the 150 mm long cables attached to the battery (terminated with a JST-RCY 2 pin connector) make installation much easier. Due to their small size and the technology used, they are ideal for powering all kinds of portable devices of various sizes and shapes.
Attention!
Before installation, familiarize yourself with the rules of using lithium-polymer batteries. Incorrect use may lead to their damage!Features
- Battery type: Li-Po
- Voltage: 3.7 V
- Capacity: 700 mAh
- Connector pitch: 2.54 mm
- Outputs: connector
- Protection: PCM
- Nominal charge / discharge current 0.2C / 0.2C
- Maximum charging / discharging current 1C / 1C
- Cable length: 150 mm
- Working temperature: -20 ... + 60 ° C
- Dimensions: 42 x 34 x 5 mm
- Weight: 14 g
574186
Data sheet
- Battery type
- Li-Po
Other - Output voltage
- 3.7V
- Battery capacity
- 700mAh
- Battery configuration
- 1S
- Number of cells
- 1
- Output/Connector
- JST-BEC 2.54mm 2 pins
- Length
- 42mm
- Width
- 34mm
- Thickness
- 5mm
- Weight
- 14g
Manufacturer AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
Responsible person AKYGA EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Wrocławska 1C 52-200 Suchy Dwór Poland contact@akyga.com
You might also like
Li-Po battery 3.7V / 850mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP603048
zł22.79
24h
Available quantity: 5
Available
Other products in the same category (16)
KAmodMIC_MEMS is a module with a microphone type SPV1840LR5H-B. Thanks to the built-in amplifier with 100-fold signal amplification, the voltage at the module output can be measured using, for example, an ADC converter
Retired
No product available!
The CY8CKIT-049-42xx Prototyping Kit is a low cost prototyping platform for customers wishing to test and develop applications using the PSoC® 4 device family. CY8CKIT-049-42XX
Retired
No product available!
No product available!
No product available!
The general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3108
Retired
No product available!
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3109
Retired
No product available!
This version has a 56:1 metal gearbox with a 0.276"-long, 4 mm-diameter D-shaped output shaft. Key specs at 6 V: 250 RPM and 250 mA free-run, 45 oz-in (3.3 kg-cm) and 3.3 A stall. Pololu 1450
Retired
No product available!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
The UM7 orientation sensor from CH Robotics is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. Pololu - 2741
Retired
No product available!
The A-Star 32U4 Mini SV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-down regulator that allows it to be powered efficiently from a 5 V to 36 V supply. Pololu 3104
Retired
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V with an available output current of around 6 A.
Retired
No product available!
High performance full NFC compliant expansion board compatible with Raspberry Pi. EXPLORE-NFC
Retired
No product available!
SATA line for Banana Pi only. Connects a 2.5 inch Hard Disk to your Banana Pi Computer
Retired
No product available!
No product available!
This is an aluminum heat-sink for the Banana Pi RAM Chips. Run cool RAM chips with this little add-on. Just one heat-sink is needed to cover both RAM chips, use the picture below as reference. Signs of RAM or CPU overheating are computer stops responding, frozen screen and power shutt down or cycling.
Retired
No product available!
The Serial Port module is specifically designed for Banana Pi with the module use Maxim MAX232 chip and DB9 port
Retired
No product available!
Li-Po battery 3.7V / 700mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP503442