- Out-of-Stock
Omni Xiaomai Smart Car - educational robot building kit for micro:bit
ID: 581895
5906623458899
A set for building an educational robot controlled with a micro:bit module. The construction of the vehicle is based on a set of bricks and the magic:bit expansion board
Description
A set for building an educational robot controlled with a micro:bit module. A great solution to introduce children to the world of programming and robotics. The easy-to-use device, programmed with a transparent block interface, will not only be an interesting toy, but above all a platform for developing the child's skills and interests.
The structure of the vehicle is based on a set of bricks and 4 engines compatible with LEGO. The robot is equipped with 4 Swedish type wheels, thanks to which it can move sideways and diagonally.
The micro:bit module is responsible for controlling the robot. It is plugged into the magic: bit expansion board, which has a built-in DC motor driver, LED backlight, IR receiver and a power supply and charging system based on a Li-Ion 18650 battery.
Attention!
The set does not include the micro:bit module and the Li-Ion 18650 battery. They must be purchased separately.
The robot is programmed using the MakeCode application. It can be controlled by a mobile application or by using the IR remote control included in the set.
Features
- Compatible with micro:bit
- Construction based on bricks
- Drive: DC motors
- Swedish wheels (omniwheel)
- RGB backlight
- Buzzer
- Expansion connectors for stepper motor and servos
- IR receiver
- Controlled by a mobile application or IR remote
- Programmed in MakeCode
- Power supply: Li-Ion 18650 battery
- Wheel diameter: 65 mm
- Dimensions: 165 x 125 x 110 mm
Kit contains
- 105 x blocks to build a vehicle
- 4 x motors
- 4 x omniwheels
- Magic expansion board: bit
- Infrared remote control
581895
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
zł36.64
24h
Available quantity: 12
Available
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
zł23.90
24h
Available quantity: 16
Available
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3500mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
zł49.94
Delivery date unknown
No product available!
Other products in the same category (16)
Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX
Retired
No product available!
A set for building a walking robot controlled by a mobile application. Totem TKR-LSP
Retired
No product available!
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005
Retired
No product available!
Camera module with a resolution of 13 MP equipped with an image sensor AR1335. It is equipped with a FoV 50° lens with an M12 mount. Designed for Raspberry Pi and Jetson Nano. ArduCAM B0277
Retired
No product available!
Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1350 mAh, equipped with a PCM protection and a 1.5 JST-ZH connector. Akyga LP503758
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Retired
No product available!
External enclosure designed to protect, transfer and store data on 2.5” HDD and SSD drives with SATA interface. UGO UKZ-1531
Retired
No product available!
128 GB Hynix SSD. It is equipped with NVMe PCIe 3.0 interface with M.2 B&M Key connector. Hynix HFM128GDHTNG-8310A
Retired
No product available!
Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW
Retired
No product available!
External case designed to protect, transfer and store data on M.2 SSD drives with SATA interface. GEMBIRD EE2280-U3C-01
Retired
No product available!
Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module
Retired
No product available!
LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074
Retired
No product available!
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Retired
No product available!
Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1
Retired
No product available!
A set for building an educational robot controlled with a micro:bit module. The construction of the vehicle is based on a set of bricks and the magic:bit expansion board